Kyocera 2K3-006 free download

File name 2K3-006.pdf

Service Bulletin SB Number: SB 2K3-006 Creation Date: 22/06/2011 Subject: Image blur at the rear edge when copying Model: FS-6025MFP/6025MFP(B)/6030MFP Phenomenon In case 11 X 17 inch / 27,94 cm X 43,18 cm sized originals are placed on the contact glass and copied, the image may appear slightly blurred with a 10mm X 10mm range from the rear edge. Cause When scanning the original, the bottom of the Wire alignment holder in the first mirror frame of the scanner, contacts the upper side of the optical wire pulley and the first mirror frame may vibrate vertically together with the light path. Previous solution 1. The wire alignment ribs of the wire alignment holder (Guide FFC LED C) have been cut to avoid contact with the optical wire pulley. 2. Due to the above mentioned change, the Sheet FFC LED has been added to press the FFC main LED lamp down. Current solution 1. The shape of the Sheet FFC LED has been changed, to improve the measure against the blurred image on the copy. 2. Due to the above mentioned change, the shape of the wire alignment holder (Guide FFC LED C) has been changed. Optical section Old condition (Viewed from the bottom of the optical section) Guide FFC LED C and Sheet FFC LED Guide FFC LED C Sheet FFC LED New condition Guide FFC LED C Carriage wire pulley Sheet FFC LED Fold of the Sheet FFC LED KMIS Service Department, Kyocera Mita Europe Page of 3 B030-B097 / SB 2K3-006 Service Bulletin Parts No. Old Parts New Parts Description Q'TY Interchange- No. No. ability Old New Old New 1 302K317171 302K317172 GUIDE FFC LED C 1