Samsung 214T.part2 free download

File name 214T.part2.rar

3 Alignments and Adjustments 3 Alignments and Adjustments This section of the service manual explains how to use the RS232 JIG. This function is needed for AD board change and program memory (IC200) change. 3-1 Required Equipment The following equipment is necessary for adjusting the monitor: Computer with Windows 95, Windows 98, Windows NT, Windows 2000, or Windows XP. MTI-2031 DDC MANAGER JIG 3-2 Automatic Color Adjustment To input video, use 16 gray or any pattern using black and white. 1. Press and hold down both the MENU and the keys at the same time for about 5 seconds. 2. A blinking display informs you that the automatic color adjustment process is completed. 3. The automatic color adjustment feature is also available in the service function. 3-3 DDC EDID Data Input 1. Input DDC EDID data when replacing AD PCB. 2. Receive/Download the proper DDC file for the model from HQ quality control department. Install the below jig (Figure 1) and enter the data. MTI-2031 DDC Manager Parallel Connector (25P Cable) Connect Monitor (Signal Cable) Figure 1. 3-4 OSD Adjustment When Replacing Panel 1. Set the Brightness and Contrast to zero, and push the MENU button more than 5 seconds. The Function OSD is displayed like Figure 2. 2. Select the Panel Information. 3. Select a panel that you want to replace with. 3-5 OSD Adjustment When Replacing Lamp Only 1. Set the Brightness and Contrast to zero, and push the MENU button more than 5 seconds. The Function OSD is displayed like Figure 2. 2. Select the Panel Information. 3. Select the upper lamp/ lower lamp. 3-1 3 Alignments and Adjustments 3-6 Service Function Spec. 3-6-1 How to Display Service Function OSD 1. The OSD is displayed just like in 3-2. 2. To exit the service function, press the POWER key and restart the Monitor. Figure 2. The example of service function OSD 3-6-2 How to Control Service Function OSD Use the or buttons to select an item that you want and press the Enter button. : : Figure 3. The display of the Panel Information in the Function OSD 3-2 3 Alignments and Adjustments 3-7 Hidden Key list 3-3 3 Alignments and Adjustments 3-4 3 Alignments and Adjustments 3-8 EDID Install