Samsung 05 Operation Instruction & Installation free download

File name 05_Operation Instruction & Installation.pdf

10 Operating Instructions and Installation 10 Operating Instructions and Installation 10-1 Front 1. SOURCE 5. Speaker Toggles between all the available input sources (TV, Ext., AV, S-Video, PC, DVI). 6. (Power) In the on-screen menu, use this button as Press to turn the TV on and off. you would use the ENTER button on the Power Indicator remote control. Blinks and turns off when the power is on and lights up in standby mode. 2. MENU Press to see an on-screen menu of your 7. Remote Control Sensor TV's features. Aim the remote control towards this spot on the TV. 3. Press to decrease or increase the volume. In the on-screen menu, use the buttons as you would use the and buttons on the remote control. 4. Press to change channels. In the on-screen menu, use the buttons as you use the and buttons on the remote control. (Without the Remote Control, You can turn on TV by using the Channel buttons.) 10-1 10 Operating Instructions and Installation 10-2 Viewing the Connection Panel 1. Connecting DVI - Connect the DVI connector to the DVD connector. - Connect the stereo audio cable to "R - AUDIO - L" on the rear of your set and the other end to "Audio Out" of the sound card on your DVD. - DVI does not support PC function. 2. Connecting Computer - Connect the D- Sub cable (optional) to "PC (PC IN)" on the rear of your set and the other end to the Video Card of your computer. - Connect the stereo audio cable (optional) to "AUDIO (PC IN)" on the rear of your set and the other end to "Audio Out" of the sound card on your computer. 3. Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network 4. Connecting Set-Top Box, VCR or DVD - Connect the VCR or DVD SCART cable (optional) to the SCART connector of the VCR or DVD. - If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set. 5. Connecting External A/V Devices - Connect RCA (optional) or S-VIDEO cable (optional) to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the A/V device. - Headphone may be connected to the headphone output ( 6 ) on th