Philips HR4337/A free download

File name _air_cleaner_©_.pdf

Air Cleaner HR 4337/A Philips Domestic Appliances and Personal Care MSH coding 8834 337 00000 PRODUCT INFORMATION GENERAL The HR 4337 is suitable for room / areas with a floor surface of up to approx. 50 m2. The air cleaner purifies the air effectively by catching up to 99 % of the airborne particles. This is done by 3 filters : Foam pre-filter : The foam pre-filter catches the larger dust particles floating in the air, such as fluff and hairs. : The ROTA filter takes out the particles of 2 microns and more (pollen). FEATURES Filter full indicator: Once the indication light comes on, the filter has to be replaced. After replacement of the filters, the filter full indicator has to be reset. The reset button has to be pressed and hold for at least 3 seconds. The indication light remains ( or comes ) on. After some time it will go out to indicate that the indicator has been reset. Electronic speed setting: 0 - 1 - 2 and turbo. Safety lock: The front cover has a safety lock. A nock of the frontcover operates the microswitch of the PCB when the front cover is closed. Once the front cover is removed the microswitch interrupts the electric circuit and the motor stops. Over heating safety device: The overheating safety device comes into operation when the motor becomes too hot. To indicate that the appliance is still in " ON " position and connected to the mains, the pilot light remains on. If this happens : - Switch off the motor. - After approx. 15 min. the air cleaner can be switched on again. TECHNICAL DATA Voltages Filters Life time HEPA filters Flow rate Total filter surface Room / area size Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands ROTA filter HEPA filter HR4920 : This filter takes out all the remaining smaller particles. This product meets the requirements regarding interference suppression on radio and T.V. : : : : : : 220 - 240 volt, 80 Watts / 50 Hz 3 HEPA filters HR4920 Max. 6 months 270 m3 1.5 m2 Max. 50 m2 Subject to modification © Copyright reserved 4822 729 22116 99/01 PCS 99 944 POSSIBLE COMPLAINTS 1) The motor makes an irritating noise. Check if : - The HEPA filters are positioned properly in the air cleaner. : - The filters have to be cleaned or replaced. : - The ROTA filter and / or fan have been properly fitted and can be rotated freely by hand. 2) The overheating device comes into operation. Check : If the filters are blocked and nothing is obstructing the air inlet and air outlet openings. : That the ROTA filter and / or fan have been fitted properly and can rotated freely by hand. PARTS LIST HR 4337/A POS. DESCRIPTION 1 Front cover 2 HEPA FILTER HR4920 3 Filter assy 3A Pre filter foam 4 Control panel 6 PCB control unit containing : PCB control unit smole sensor shield slider actuator 7 Micro switch 8 Washer frame 9 Top grill 10 Front housing containing : front housing hole plug foot 11 Rota filter containing : rota prefilter rota knob 12 Fan assy containing : fan lock washer M