File information: | |
File name: | _vacuum_cleaner_®_.pdf [preview HR8900] |
Size: | 973 kB |
Extension: | |
Mfg: | Philips |
Model: | HR8900 🔎 |
Original: | 4322 277 00269 🔎 |
Descr: | Service Manual ser. Vision - pag. 6 |
Group: | Electronics > Consumer electronics |
Uploaded: | 23-12-2006 |
User: | salvacolnome |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name _vacuum_cleaner_®_.pdf Vision Vacuum cleaner HR 8900 ! Service Information ! Service Information ! Service Information Philips Domestic Appliances and Personal Care Service Manual PRODUCT INFORMATION Maximum air displacement Maximum vacuum water column Power consumption (IEC) Dust storage capacity Cord length Filter system (depends on version) : : : : : : : : : : : : 37 l/sec. 310 cm 1500W 4 litres 8.3 metres Paper dustbag Exhaust air filter Motor inlet filter 48 x 30 x 25 cm 6.4 kg 78 dB Orange / grey SERVICE INFORMATION - The infrared remote control can adjust the suction power with 5 speeds. When switched on, the appliance always starts with the highest power, even without a connected hose. Use LR03 batteries. Alkaline is advised. - To open the appliance, first remove the panel (item 13) with a big screw driver (V) to disconnect the 4 snap locks (the 4 screws of button panel item 39 can be loosed) and then remove the two pedals (items 1 and 14) with a pin (W), max. diameter 2.5 mm. - Power meter (8838 000 60300) is a commercial item with a fixed air displacement which measures the vacuum of the appliance. - Component configuration on exploded view may differ in case of specific versions. However, the actual components are distinguished by means of code numbers. - The spare parts have been standarized as much as possible. - Item 7A. This appliance is provided with ring 7A. For other parts use item 6 or 7. - Item 16 Cotton dustbag is used in those countries where paper dustbags are not available. - Item 21 is provided with the long cord-winder spring; both long and short cords can be used in combination with this spring. - To disassemble the cordwinder use TORX screw driver no T15, which is one of a set consisting of T20, T15, T10, T9, T8, T7 and T6 = 4822 395 50145. - Item 43 air valve opens to cool the motor if the air displacement is too low or if the air flow is blocked. - Cordwinder spring has to be tensioned till maximum minus approx. 1,5 revolution. - Dimensions cleaner Weight without accessories Noise Colour OPTIONAL Exhaust air filter Oslo cotton dustbag Oslo paper dustbag set Oslo paper dustbag set Oslo 3-M dustbag Active carbon inlet filter Active carbon filter set S-class filter S-class filter set Polishing nozzle Turbo brush HR 6932 (8836 932 01210) HR 6935 (8836 935 01010) HR 6938 (8836 938 06110) economy HR 6938 (8836 938 10110) hygiene HR 6938 (8836 938 91010) HR 6949 (8836 949 01010) HR 6968 (items 41 + 42) HR 6992 (8836 992 01010) HR 6993 (items 48 + 49) HR 8040 (item 111) HR 6988 (item 114) This product meets the requirements regarding interference suppression on radio and TV. After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment. Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 4322 277 00269 00/03 PCS 101 441 1 2 3 4 5 6 7 7A 8 9 10 11 12 13 14 15 16 4322 0 |
Date | User | Rating | Comment |