Philips HB541/A free download

File name UV-A_solarium_©_.pdf

UV-A Solarium Service Service Service Domestic Appliances and Personal Care HB 541/A HB 542/A Service Manual 4822 729 21606 is herewith cancelled. Service Manual SAP coding 8843 541 99999 SAP coding 8843 542 99999 PRODUCT INFORMATION HB541 HB542 Input power HB 541 HB 542 Starter Ballast Timer Radiation area Radiation distance Height adjustment Protecting goggles Output UVX36 meter : : : : : : : : : : : : : 8 x TL100W/Cleo 10 x TL100W/Cleo approx. 920W approx. 1150W S12 100W/230V 60 mins Eaton 174 x 56 cm 20 cm between 66-96 cm HB072 - 4822 690 80147 HB541 >3.8 mW/cm 2 at 20 cm HB542 >4.6 mW/cm 2 at 20 cm S a M a1 b1 La L HB 541 8x HB 542 10x HINTS FOR REPAIRS - By interchanging it can be found out whether starters, lamps or ballasts are defective. If they are not, the internal wiring is to be checked, especially that on the tube holders. - The snap-on connections of the wiring can be unlocked with a paper clip. - The quick blackening of a tube-end points to a defective starter or a wiring fault. - Disassembly of radiation part Remove end cover (item 10). Remove cover (item 9) and acrylic plate (item 11). For removal of ballast or fan the pop rivets must be drilled out. New parts have to be fixed with pop rivets 4.8 mm or blind-rivetting nuts M3 (no service items). - Disassembly of gasspring (item 15) Put solarium in highest position. Fasten ornamental screw (item 16) Now turn the stand and the radiation unit through so far that the legs of the stand and the radiation unit rest on the floor. Remove the nut inside the stand tube. Remove the ornamental screw and unlock the plastic guide block. Separate the inner and outer stand part. Remove the ornamental prop and the spring clip at the inner side of the stand and lift the pin out. The gasspring can be taken out now. Note: a new gasspring comes with plastic guide block, spring clip and ornamental prop. Disassembly of hinge (item 13) Remove the ornamental prop, spring clip and plastic ring. Polish the shaft with abrasive paper to make the removal of guide blocks easier. On assembly see to it that the cams of the spring clip rest in the groove on the shaft. © Published by Philips Domestic Appliances and Personal Care Printed in The Netherlands Copyright reserved Subject to modification 4322 277 00365 00/08 HB 541/A HB 542/A 8 9 10 1 11 2 3 12 4 13 14 15 16 5 17+15 6 18 7 19 20 1 2 3 4 5 6 7 8 9 10 4822 410 11079 4822 255 10255 4822 219 80258 4822 361 10747 4822 255 10254 9965 000 06405 4822 134 30014 4822 349 40068 4822 442 00005 4822 442 00006 timer knob lamp/starter holder S12 starter fan 230V lamp holder side panel TL 100W/Cleo timer 60 mins cover end cover 11 12 13 14 15 16 17 18 19 20 - 4822 466 10705 4822 146 10344 4822 520 10789 9965 000 02280 4822 529 10329 4822 502 13999 9965 000 02732 9965 000 01865 4822 462 11193 4822 528 10924 acrylic plate ballast 230V bearing set handgrip gasspring orn. screw stand with gasspring side panel with grip U-shaped foot swivel wheel