Philips HI105 HI108 HI110 free download

File name irons_®_.pdf

Irons HI 105 HI 108 HI 110 HI 114 HI 116 Philips Domestic Appliances and Personal Care PRODUCT INFORMATION HI 105 colour white colour red sole plate linished sole plate coated pilot lamp Voltage / frequency Power consumption x x HI 108 x x x HI 110 x x x HI 114 x x x HI 116 x x x : 220 - 240 V, 50 - 60 Hz : 110 - 127 V, 50 - 60 Hz : 900 - 1100 Watts Product meets the requirements regarding interference suppression on radio and TV. Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 4822 729 21693 96/08 PCS 87 781 ASSEMBLY ADVICE CORDSET 5 remove SCREW A remove BACK PLATE 101 remove remove remove remove remove SCREW A BACK PLATE 101 SCREW B 3x CORDSET 5 INLAY 103 PARTS LIST HI 105 / HI 108 / HI 110 / HI 114 / HI 116 POS. DESCRIPTION 1 1 2 3 4 5 5 5 SOLE PLATE 110 - 127 V (incl. pos. 3) SOLE PLATE 220 - 240 V (incl. pos. 3) INSOLATION STUDS THERMOSTAT PILOT LAMP 100 - 240 V CORDSET EURO PLUG CORDSET UK PLUG CORDSET UL PLUG SERVICE CODE 4822 259 10209 4822 259 10211 4822 532 12722 4822 282 10298 4822 134 10055 4822 321 10951 4822 321 10952 4822 321 10947 SOLE PLATE 1 THERMOSTAT 3 INSOLATION STUDS 3 LAMP 4 remove DIAL 102 remove SCREW C 3x remove HANDLE 104 NOTES: For standarisation reasons: * only the coated sole plate will be supplied for those types, * * which are suitable for 220 - 240 V. only the linished sole plate will be supplied for those types, which are suitable for 110 - 127 V. only cordsets with a length of 2.6 m will be supplied. the colour of the cordset may differ from the original colour. Parts, with numbers from 100 and higher, cannot be ordered separately. NOTE: After the product has been repaired, it should function properly and has to meet the safety requirements and legal regulations as laid down and officially established at this moment. ADJUSTMENT AND CONTROLS Thermostat 3 Thermostat ( 3 ), fitted to sole plate ( 1 ) has already been adjusted by the supplier and secured by glue. To avoid disfunction of the iron, NEVER readjust the thermostat. Adjustment Thermostat 3, supplied as a spare part. Connect the connecting strips to an Ohm meter. Set the vertical slot of the thermostat bush to the 11 o'clock position ( see picture ). Turn the adjusting screw clockwise or anti-clockwise until the Ohm meter indicates "0". ( the contacts are closed ) Then turn the adjusting screw clockwise until the Ohm meter indicates . ( the contacts are open ) While free turning the thermostat bush, check if the thermostat switches in the 11 o'clock position. Secure the adjusting screw by glue. After adjusting the thermostat, always check the temperature of the soleplate, with the dial set on the MAX. position. ( 220 ± 20 °C )