Philips HR4340/A free download

File name air_cleaner_®_.pdf

Air Cleaner HR 4340/A Philips Domestic Appliances and Personal Care Service Manual 4822 729 21616 herewith cancells. PRODUCT INFORMATION GENERAL The HR 4340 is suitable for rooms / areas with a floor surface of up to approx. 40 m2. The air cleaner cleans the air effectively by catching 90% of the gases and 95% of the particles produced by smoking. This is done by 3 filters : Foam pre-filter : The foam pre - filter catches the larger dust particles floating in the air such as fluff and hairs. FEATURES Filter full indicator: Indicates that the filter has to be replaced. This has to be done when the white part of the indicator has turned pink like the other (pink) half. Speed control: With 3 speed settings. Safety lock: Prevents the customer from opening the front cover whilst the air cleaner is switched on. The front cover can only be opened, if the switch has been set to the "0" position. Overheating safety device: The overheating safety device comes into operation when the motor becomes too hot. To indicate that the appliance is still in "ON" position and connected to the mains, the pilot light remains on. If this happens : - Switch off the motor. - After approx. 15 min. the air cleaner can be switched on again. HEPA filter HR4940 : This filter takes out all smaller airborne particles. Carbon filter : The carbon filter with activated carbon granulates (HR4941) effectively absorbes the smoke gases. Product meets the requirements regarding interference suppression on radio and T.V. TECHNICAL DATA : 100 Volt 110 - 120 Volt 220 - 240 Volt Filters : 2 carbon filters Life time filters : carbon filters Hepa filter Flow rate : 160 m3/hr Surface filter surface : 1 m2 Room / area size : Max. 40 m2 Voltages : 95 Watts : 95 Watts : 95 Watts : 3 months : 6 months Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 4822 729 21809 97/03 PCS 88 615 POSSIBLE COMPLAINTS 1) The motor makes an irritating noise. Check if : - The carbon filters are positioned properly in the air cleaner. : - The filters have to be cleaned or replaced. : - The fan can be rotated freely by hand. Only for the HR4340/A appliances, which have been produced before week 9618. If the motor still makes an irritating noise after the above checks, the complete product should be replaced by a sample, produced after week 9618. 2) The overheating device comes into operation. Check : If the filters are not blocked and nothing is obstructing the air inlet and air outlet openings. : That the fan can be moved freely by hand. PARTS LIST HR 4340/A POS DESCRIPTION 1 FRONT COVER containing : frame 1 foam pre-filter 11 cover 100 CONTAINER CARBON GRANULES HEPA FILTER HR4940 CONTROL PANEL SWITCH KNOB containing : switch knob spring SAFETY LOCK containing : safety lock spring PILOT LAMP 220 - 240 V PILOT LAMP 100 - 127 V containing : lamp lamp cover 8 9 10 SWITCH AIR OUTLET FRONT HOUSING consisting of : front housing hol