Philips HP5230 free download

File name cellesse_©_.pdf

Cellesse HP 5230 Beige / Brown HP 5230 Beige / Green Philips Domestic Appliances and Personal Care Service manual 4822 729 21748 is herewith cancelled PRODUCT INFORMATION Type appliance Voltage (mains) : 12 V adapter from mains (AC/DC) : 220-240 V, 50/60 Hz 110-127 V, 50/60 Hz : DC type Introduction The Cellesse is a special massage system, designed to help reduce or prevent the unsightly appearance of cellulite. Cellulite is the increased visibility of lumpy fat deposits through the surface of the skin. A common used description is `orange peel skin' because of its unique pitted, lumpy appearance. Cellulite should not be confused with "cellulitis", which is a medical term linked to bacterial infection of the skin. Cellulite can be reduced with the help of this product. It can never be completely eliminated and will return when neglected. A maximum reduction of the Cellulite layer by 55 % can be reached after 3 months, if the appliance is used 3 times a week for 15 mins. on each leg. The Cellesse does not reduce the fat in the fat layer. Motor Max. powerconsumption : 8 watts Under pressure Length cord : 5 steps from 80 mbar to 250 mbar : 2.5 m Note: Product meets the requirements regarding interference suppression on radio and TV. Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 4822 729 22124 99/02 PCS 101 214 FUNCTIONAL DESCRIPTION OF THE HP5230 CELLESSE Function of the Cellesse The product is connected to the mains and the ON/OFF switch ( A ) is set to level 1 - 5. The pump ( B ) starts to function. The pump ( B ) only starts to function if the appliance is in a proper contact with the skin so a vacuum of at least 80 mbar can be reached. Once a vacuum of 80 mbar is reached, the electronic suppression switch ( C ) switches on the motor ( D ) of the massage rolls ( E ). To avoid a painful sucking in of the skin, the vacuum stop buttons ( F ) can be operated so that the vacuum is eliminated. The Cellesse only functions properly if the product is put properly on the skin so that the pump can build up a vacuum in the sucking area.( G ) Cleaning and Maintenance Never immerse the appliance in water nor rinse it. For the best results, keep the Cellesse clean at all times, using a damp cloth and a spot of detergent, if necessary. Do not use alcohol, acetone, gasoline, abrasives, scourers and so on for cleaning the appliance. When cleaning, special attention should be paid to the rollers on the underside. Cleaning the rollers To clean the rollers select Level 1 Fig. 1 Cover the suction opening with your thumb so the rollers start to rotate. Fig. 2 Wipe the rollers clean with a damp cloth. Fig. 3 OLD VACU-stop Button F On/off Switch + Suppression Switch Level 1-5 Sleeve 105 El. Suppression Switch C Switches on the motor D automatically at 80 mBar underpressure Sleeves Pump B A1 P-JACK W1 blue C24 1 not on PCB A2 R31 W3 red C1 R1 Q1 R2 R3 R25 R5 C2 R6 D1 W