Philips Domestic App. FC9108/A (/B) free download

File name vacuum_cleaner_®_.pdf

Specialist Vacuum cleaner FC9108 /A /B Philips Domestic Appliances and Personal Care Service Manual PRODUCT INFORMATION - This product meets the requirements regarding interference suppression on radio and TV. - After the product has been repaired, it should function properly and has to meet the safety requirements as officially laid down at this moment. TECHNICAL INFORMATION - Colour /A Version /B - Maximum air displacement - Maximum vacuum water column - Power consumption (IEC) 230 V - Duststorage capacity - Type number dustbag - Cord length (depends on version) - Filter system : : : : : : : : : : : : : : : Daybreak purple 2000 W logo 37 l/sec. 310 cm 1500 W 3L FC8021 7 metres Paper dustbag Exhaust AFS air filter Motor inlet filter 460 x 315 x 270 mm 595 x 395 x 295 mm 5.88 kg 9.135 kg DISASSEMBLY- AND RE-ASSEMBLY ADVISE - Open the appliance, first remove the exhaust filter grille (item 20), C 2x and then remove the 2 screws C of the switch control panel (item 15). - Undo and remove the 9 screws C in the upper housing (item 8). You will require a screwdriver C 9x with a 14.5 cm-long shank for this. Depending on the version screwdriver 9965 000 08332 for cross head or onwards 0234 screwdriver 4322 009 08490 for T15 can be used. - The component configuration shown in the exploded view may differ in case of specific versions. The components are distinguished by means of code numbers. - When the repair is finished, check whether all functions of the appliance work properly. - To disassemble the cord winder, use TORX screwdriver no. T10, which is one of a set consisting of T20; T15; T10; T9; T8; T7 and T6 (code number 4822 395 50145). OPTIONAL (accessories) FC8021 FC8030 FC8031 FC8034 HR6988 HR8040 S-bags AFS-filter HEPA Air Filter Upgrate kit Active Carbon Filter Turbo brush nozzle Polishing nozzle - Dimensions of cleaner Dimensions of packaging Net weight Gross weight Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 03/03 FC9108 /A /B REPAIR INSTRUCTION - Item 4, cotton dustbag, is used in countries in which paper dustbags are not available. - If the reel half spring unit is replaced, shaft A must be lubricated with silicone grease. Do not apply any silicone grease to or spill any grease on terminals (43) or conductors (42). - Item 40 is provided with a long cord-winder spring, but both long and short cords can be used in combination with this spring. (L = 9.3 m) - Depending on the original cord, the spare cord must be shortened to the length of the original cord. - The cord winder spring must be tensioned to the maximum level and then be rewound approx. 1.5 turn - Item 13, air valve, opens to cool the motor if the air displacement is too low or if the airflow is blocked. - To adjust the telescopic tube (item 59) to the required length, push the adjustment collar in the direction of the arrow while sliding the top section of the telescopic tube into or out