Sharp LC-13S1U-S free download

File name LC-13S1U-S.pdf

LC-13S1U-S SERVICE MANUAL S44S1LC13S1US LCD COLOR TELEVISION MODEL LC-13S1U-S In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used. OUTLINE The above model is based on the LC-13S2U-S. Its desktop stand has been redesigned. This Service Manual covers the modifications only. For other technical data, refer to the Service Manual for LC-13S2U-S (S83G8LC13S2U). CONTENTS Page » » » » » » IMPORTANT SERVICE SAFETY PRECAUTION ...2 SPECIFICATIONS ...5 OPERATION MANUAL ...6 DIMENSIONS ...9 REPLACEMENT PARTS LIST ... 10 PACKING OF THE SET ...13 SHARP CORPORATION This document has been published to be used for after sales service only. The contents are subject to change without notice. LC-13S1U-S IMPORTANT SERVICE SAFETY PRECAUTION Л Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: · Use an AC voltmeter having with 5000 ohm per volt, or higher, sensitivity or measure the AC voltage drop across the resistor. · Connect the resistor connection to all exposed metal parts having a return to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor. All checks must be repeated with the AC cord plug connection reversed. (If necessary, a nonpolarized adaptor plug must be used only for the purpose of completing these checks.) Any reading of 0.75V peak (this corresponds to 0.5 mA. peak AC.) or more is excessive and indicates a potential shock hazard which must be corrected before returning the monitor to the owner. WARNING 1. For continued safety, no modification of any circuit should be attempted. 2. Disconnect AC power before servicing. CAUTION: FOR CONTINUED PROTECTION AGAINST A RISK OF FIRE REPLACE ONLY WITH SAME TYPE F3701 (2.0A, 250V), F3301 (1.25A, 250V), F6501 (1.25A, 250V) AND F6502 (1.25A, 250V) FUSE. A V BEFORE RETURNING THE RECEIVER (Fire & Shock Hazard) Before returning the receiver to the user, perform the following safety checks: 1. Inspect all lead dress to make certain that leads are not pi