JVC CH-X200 free download

File name CH-X200.pdf

Car Audio SERVICE INFORMATION JVC SERVICE & ENGINEERING COMPANY OF AMERICA SERVICE·ENGINEERING·PARTS A Division of JVC Americas Corp. 10 New Maple Avenue Pine Brook, NJ 07058 This bulletin is issued as an aid for service personnel maintaining this product. Reproduction or redistribution of the contents of this bulletin without the written permission of JVC is prohibited. © Copyright 1999 JVC Americas Corp. All Rights Reserved. MODEL: See Below SB-9926-Q _______________________________________ NUMBER: ___________ Will Not Power On - Dead Unit November 1999 SUBJECT: _______________________________________ DATE: _____________ Model No. CH-X200J CH-X200RFJ CH-X11J CH-PK11J Manual No. 49493 49494 49506 49488 Performed at factory after serial no. 104F7001 094U2701 09491001 09495210 Symptom: The unit will not turn on. F901, p/n ICP-N70, is open. Cause: The FFC Wire rubs on the L. Bracket Assembly causing the insulation to wear off. This causes a short and opens fuse F901. Cure: Install an insulating Spacer Bracket p/n LV41266-001A as shown below. Clean the L. Bracket Assembly with alcohol or other cleaner before installing the spacer. VL41266-001A Bracket Spacer VM-00-0007

File name Quick Tip List.txt

Quick Tip List EC-06-00-01 R-2 & R-3 error codes Replaced IC601 p/n UPG780058GC-052 FEL-00-01-03 The lifter gear has jammed to up/down FEL-01-00-08 Disc tray motor keeps going down Replaced the IC601 by the new one FEL01-01-04 No sound when playing CD Replaced IC101 p/n BA15218F-XE FEL-02-00-01 When CD is positioned the motor is kicking Replaced the new pick-up. P/N OPTIMA 720A1 FEL-02-00-02A Wrong CD position, motor goes up all the time Replaced new CPU. P/N UPD78005GC-052 FEL-02-00-03A Loosing parts Replaced the new one. P/N VKS5587-002 FEL-02-00-08 CD does not play Replaced the new pick PFC FEL-02-00-09 CD spindle doesnt work Replaced the CPU. P/N UPD780058GC-052 FEL-03-00-02 Tray motor doesnt work Replaced by a new IC, P/N UPD780058GC-067 FEL-03-01-02 Unit will not power on Replaced Q911 p/n 2SD1994A/RS/-T FEL-04-00-03 Doesnt play CD. Replaced IC521. FEL-04-00-04 Mute problem. Replaced the TR Q101 and cable. FEL-05-00-01 CD will not work. Loose Shaft of Lifter Gear and some broken shafts. Too costly to repair. FEL-06-00-01 Cannot be ejected Repaired the PCB Holder and replaced fitting p/n LV20065-002A FEL-07-00-05 Clicking noise when CD is playing. The attached part is easily out of placed from the lifter unit M2MM-30. Reinstall the part. FEL-08-99-01 Magazine stuck in unit FEL-09-00-01 Unit Dead Replace with new connector Q101, Q981 and Cable p/n VMW5777C FEL-09-99-03 Dead unit Replaced F901 p/n ICP-N70 FEL-99-10-05 No audio out Replaced the IC521(TC9462F) FEL-99-10-06 Weak sound Replaced the TR Q581 FEL-99-11-05 The track #2 was missing on play Replaced the IC601 FEL-99-11-09 CD feed motor kept turning Replaced the IC601 MI-04-00-01 Will not load c.d.s replace IC581 p/n BA59265 MI-04-00-06 Unit will not play or eject magazine. Replace S601 p/n VSH1173-001. NE-05-99-26 Jammed Replaced release lever p/n LV30682-005A-OL