File information: | |
File name: | microwave_oven_®_.part1.rar [preview KOT-1H0SBA, KOT-1H6SBA, KOT-1H2U9A] |
Size: | 3000 kB |
Extension: | |
Mfg: | Daewoo |
Model: | KOT-1H0SBA, KOT-1H6SBA, KOT-1H2U9A 🔎 |
Original: | T1H0SBA001 [May. 2003] 🔎 |
Descr: | Service Manual Microwave Oven (Sensor, Non Sensor) - [6.285Kb - Part 1/3] pag. 68 |
Group: | Electronics > Consumer electronics > Microwave Ovens |
Uploaded: | 20-11-2007 |
User: | salvacolnome |
Multipart: | 0 1 2 |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name KO T1H0SBA.pdf S/M No. : T1H0SBA001 Service Manual Microwave Oven Model: KOT-1H0SBA(SENSOR) KOT-1H6SBA(SENSOR) KOT-1H2U9A(NON-SENSOR) Caution : In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr). DAEWOO ELECTRONICS CORP. http : //svc.dwe.co.kr May. 2003 PRECAUTIONS TO BE OBSERVED BEFORE AND DURING SERVICING TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY (a) Do not operate or allow the oven to be operated with the door open. (b) Make the following safety checks on all ovens to be serviced before activating the magnetron or other microwave source, and make repairs as necessary: (1) Interlock operation, (2) Proper door closing, (3) Seal and sealing surfaces (arcing, wear, and other damage), (4) Damage to or loosening of hinges and latches, (5) Evidence of dropping or abuse. (c) Before turning on power to the microwave oven for any service test or inspection within the microwave generating compartments, check the magnetron, wave guide or transmission line, and cavity for proper alignment, integrity, and connections. (d) Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation and transmission systems shall be repaired, replaced, or adjusted by procedures described in this manual before the oven is released to the owner. (e) A microwave leakage check to verify compliance with the Federal performance standard should be performed on each oven prior to release to the owner. TABLE OF CONTENTS SAFETY AND PRECAUTIONS ...2 SPECIFICATIONS ...3 EXTERNAL VIEW...4 INSTALLATION ...4 OPERATIONS AND FUNCTIONS...4 DISASSEMBLY AND ASSEMBLY...5 TROUBLE SHOOTING GUIDE ...31 MEASUREMENT AND TEST ...33 WIRING DIA |
Date | User | Rating | Comment |