PEUGEOT Satelis free download

File name ΡΕUGEOT SATELIS SERVICE MANUAL BODY PANELS.pdf

1 2 3 Removal of the rider's saddle Removal of the passenger's saddle Procedure 1. - Open the saddle cover storage compartment. - Remove: . The screw. . The saddle cover. . The rider's saddle. Open the passenger's saddle. - Remove: . The 2 upper pivot clips. . The 2 pivot pins. 4 - Flip up the seat to the front of the vehicle. - Remove: . The 2 lower pivot clips. . The 2 pivot pins. - Remove the passenger seat. Removal of a RH or LH grab handle Procedure 2. - Remove the grab handle trim. - Remove the 2 nuts and the screw that secure the handle. - Remove the grab handle. 5 Removal of a RH or LH taillight taillight bulb - Remove the grab handle. See: Procedure 2. - Remove the taillight. (1 screw). Removal of a - Remove the 4 screws from the taillight unit. - Separate the 2 parts in order to reach the bulbs. 6 Removal of a RH or LH side cover Procedure 3 - Remove: - The rider's saddle. See: Procedure I. Page: 30. - The grab handles. See: Procedure 2. Page: 31. S Remove the rear cover and its trim. (4 screw). - Remove the 2 screws that secure the side cover linkage and the footboard. 7 - Push aside the footboard in order to clear side cover holder eyelet. Remove the side cover. - Disconnect the taillight. Removal of the storage compartment Procedure 4. - Remove the side fairings. See: Procedure 3. Page: 32. - Disconnect the plate light and the saddle opening contact switch. Remove the storage compartment. (4 screws and 2 nuts). 8 When dismantling the splash guard, fit the screws with standard thread lock. Removal of the tank covers Procedure 5. - The rider's saddle. See: Procedure I. - Page: 30. Open the tank filler cap door. Remove the 4 screws that secure the rear panel. Remove the upper fairing. 9 - Remove the utility hanger. (2 screw). - Remove 1 nut and 2 screws that secure the lower fairing. - Remove the screw that secures the rear cover I footboard on each side of the vehicle. (1) - Push slightly aside the cover I footboard assembly and remover the fuel tank cover panel by sliding it backwards. - Removal of a RH or LH footboard Procedure 6. - Remove the tank cover panel. See: Procedure 5. - Remove the footboard mat. - On each side remove: . 8 plastic screws. (1) . 3 washer head screws. 06 mm. (2) . I washer head screw. 05 mm. (3) 10 - Press on the underbody panel in order to separate it from the footboard. (A) - Separate the footboard from the rear fairing and bracket that anchors it to the body. (B) - Separate the front of the footboard which is linked to the rear part of the leg shield panel. (C) 11 - Removal of the front top cover panel - Procedure 7. - Remove the front top cover panel. (4 screw). Removal of the headlight and sidelight assemblies Removal of the headlight bulbs - Remove the front top cover panel. See: Procedure 7. To reach the bulbs, remove the headlight. (3 screw) 12 - Removal of the front shield panel - Procedure 8. - Remove the front top cover panel. See: - Procedure 7. - On each side remo