PHILIPS HB558/A [/B] free download

File name uv_solarium_©_.pdf

Combi Solarium HB558/A HB558/B Philips Domestic Appliances and Personal Care Service Manual TECHNICAL INFORMATION Input consumption Lamp couch Lamp canopy : approx. 2540 W / 230 V / 50 Hz : 10x TL Cleo Performance 100W-S : 6x TL Cleo Performance 100W-S : 4x TL Cleo Performance 80W-S : 1x HP400/H Starter Ballast Timer Radiation area Protecting goggles : 20x S12 : 1x ZG 4,5D : 17x 100 W / 230 V : 6x 80W / 230V : 1x 30 mins ­ motor-driven : 174 x 58 cm : HB071 ­ 4822 690 80123 L11a L11b L11c S11 La11 M1 SK3 TCO L La S M SK1 (HB558/A) 6x 100 W 4x 80 W : 1x HP400/SH (HB558/B) Output UVX36 meter : > 5.6 mW/cmІ - couch : > 5.0 mW/cmІ at 20 cm ­ canopy : (both values with HP400 on) = changed 1x HPA 260 W NTC1 M2 SK2 Canopy L La S 10 x 100 W 4x C M NTC 3x Couch 230 V / 50 Hz Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 03/02 HB558/A HB558/B HINTS FOR REPAIRS - Interchange starters, lamps or ballasts to establish whether they are defective. - If they are not defective, check the internal wiring, especially that connected to the lamp holders. - The snap-on connections of the wiring can be detached by means of a paperclip. - Premature blackening of a tube end points to a defective starter or a wiring fault. - A burned NTC resistor or overheated wiring points to a wiring fault at the connecting block. - The acrylic sheets can be cleaned with a moist cloth and some washing-up liquid. Avoid the use of alcohol, alcohol-based cleaners, petrol, acetone or abrasives. These substances can cause irreparable damage to the sheets. CANOPY Replacement of lamps/starters (items 2, 42 and 7) Loosen the screws (item 25) and remove the end covers (item 12). Pull the acrylic sheet (item 43) out of the appliance. Now the lamps/starters can be replaced. Disassembly of gas spring (item 26) Fold the canopy up and have a second person lock it in this position. Undo two nuts on either side and take the gas spring out of the hinged parts. Disassembly of fan (item 20) Unlock the clamps of the fan cover (item 21). Loosen the connecting wires and pull out the fan unit (item 20). Disassembly of timer (item 32) Remove the end cover on the side where the timer is located. Pull the top cover on this side out of the groove of the side panel (item 33). Pull the side panel off the metal frame to create enough room to remove the timer. Disassembly of hinge (items 27, 28 and 29) Unlock the clamps of the hinge cover with a screwdriver. Loosen the screw (B). Ask a second person to depress the locks of the bearing bush (item 29) with two small screwdrivers. Position yourself on the other side of the appliance and press the couch with your foot while pulling the canopy slightly (approx. 5 mm) towards you to deactivate the lock. Repeat this procedure at the other hinge. Now you and the other person should position yourselves at opposite ends of the appliance. Lift the canopy from the stand by pu