PHILIPS HR 4332 [/A] free download

File name air_cleaner_©_.pdf

Air Cleaner HR 4322/A Philips Domestic Appliances and Personal Care MSH coding 8834 322 00000 PRODUCT INFORMATION GENERAL The HR 4322 is suitable for rooms / areas with a floor surface of up to approx. 30 m2. The aircleaner purifies the air effectively by catching up to 99% of the airborne particles. This is done by 3 filters : Foam pre - filter : The foam pre - filter catches the larger dust particles floating in the air, such as fluff and hairs. : The ROTA filter takes out the particles of 2 microns and more (e.g. pollen). FEATURES Speed control: With 3 speed settings. Safety lock: Prevents the customer from opening the front cover whilst the air cleaner is switched on. The front cover can only be opened, if the switch has been set to the "0" position. Over heating safety device: The overheating safety device comes into operation when the motor becomes too hot. To indicate that the appliance is still in "ON" position and connected to the mains, the pilot light remains on. If this happens : - Switch off the motor. - After approx. 15 min. the air cleaner can be switched on again. ROTA filter HEPA filter HR4920 : This filter takes out all the remaining smaller particles. TECHNICAL DATA Voltages Filters Life time HEPA filters Flow rate Total filter surface Room / area size : : : : : : 220 - 240 Volt : 70 Watts 2 HEPA filters HR4920 Max. 6 months 150 m3/hr 1 m2 Max. 30 m2 This Product meets the requirements regarding interference suppression on radio and T.V. Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 4822 729 22113 99/01 PCS 99 935 POSSIBLE COMPLAINTS 1) The motor makes an irritating noise. Check if : - The HEPA filters are positioned properly in the air cleaner. : - The filters have to be cleaned or replaced. : - The ROTA filter and / or fan have been properly fitted and can be rotated freely by hand. 2) The overheating device comes into operation. Check : If the filters are blocked and nothing is obstructing the air inlet and air outlet openings. : That the ROTA filter and / or fan have been fitted properly and can rotated freely by hand. PARTS LIST HR 4322/A POS. DESCRIPTION 1 Front cover 2 HEPA FILTER HR4920 3 Filter assy 3A Pre filter foam 4 Control panel 5 Switch knob containing : switch knob spring 6 Safety lock containing : interlock slide interlock spring 7 Neon assy containing : neon light lens 8 Rotary switch 9 Top grill 10 Front housing containing : front housing hole plug foot 11 Rota filter containing : rota prefilter rota knob 12 Fan assy containing : fan lock washer M6 shakeproof washer nut M6 hex. zinc. plate nut cover hexagone 13 Motor 13A Motor buffer containing : motor mounting retaining bracket spacer 14 Back housing containing : back housing foot 15 Motor cover 112 113 115 4822 310 11294 (2x) 14 107 4822 442 01752 5 101 4822 310 11291 6 102 4822 310 10969 7 103 4822 273 10367 4822 458 10672 4822 310 11293 10 105 107 4822 310 10