SONY AE-6D free download

File name AE-6D.pdf

SERVICE MANUAL MODEL COMMANDER DEST CHASSIS NO. AE-6D CHASSIS MODEL COMMANDER DEST CHASSIS NO. KD-32DX100U RM-933 UK SCC-Q84B-A KD-32DX100 RM-933 KD-32NX100/KD-32NS100 RM-935 -1- SECTION 4 CIRCUIT ADJUSTMENTS 4-1. Electrical Adjustments Service adjustments to this model can be performed using the supplied remote Commander RM-933 (KD-32DX100U) and RM-935 (KD-32NX100U/ KD-32NS100B). Programming the Remote Commander for Operation in Service Mode 1. Press the VCR/TV/DVD button until the TV LED lights. Press and hold the yellow button for approx. 5 seconds until the TV LED flashes quickly. Model Setting 3. Press 99999. All three LED's should light. The remote commander is now set to Service Mode. To return the remote commander to normal operation mode repeat steps 1. and 2. then press 00000. All three LED's should light. The remote commander is now set to normal mode. Setting the TV into Service Mode 1. Program the remote commander for operation in Service Mode as described above. Turn on the TV main power switch. Press the `VIDEO' button or on the remote commander twice. `TT ' will appear in the upper right corner of the screen. Press the `MENU' button on the remote commander twice to obtain the following menu on the screen. Service AE6D, Jul 26 2001, v490S3 Initialising Reset Devices Monitoring Device Register Setting Special Adjustment Model Setting KD-32NX100 KD-32NS100 KD-28DX100 KD-32DX100 Reset Initialising Menu Initialising Model Setting Destination Setting Basic Setting Feature Setting Select : Next menu : 2. 4. The menu contains a list with all the available models of this software to set up the TV set in an easy way. The selection of a model is setting data for its features and hardware resources which cannot be detected by the automatic power on H/W detection as well as a special model byte to get an unique model identification for models which cannot be differed by features and hardware resources (e.g. KD-32DX100U and KD-32NX100U). Before data is set, the user will be asked if he really wants to set a new model. If the user agrees, the destination setting menu is automatically shown. 2. 3. 4. BLACK = No Conformity GREEN = Compatible Model RED = Conformity for all data Select : Last menu : Set Model : Indication of Model Compatibility. Black: Select : Next menu : If any data does not match to specific model, the model name is displayed in black. Green: 5. 6. 7. Move to the corresponding adjustment item using the up or down arrow buttons on the Remote Commander. Press the right arrow button to enter into the required menu item. Press the `Menu' button on the Remote Commander to quit the Service Mode when all adjustments have been completed. All data which is checked by model setting menu concurs to model except model byte. Red: All data which is checked by model setting menu concurs to model including model byte. Note: After selecting a model, it may be necessary to reset some devices to get the correct data. (T