SONY DX-1A free download

File name DX-1A.pdf

Self Diagnosis Supported model SERVICE MANUAL MODEL NAME REMOTE COMMANDER DESTINATION DX-1A CHASSIS CHASSIS NO. KV-32XBR450 KV-32XBR450 RM-Y184 RM-Y184 US CND SCC-S47D-A SCC-S48D-A KV-32XBR450 RM-Y184 TRINITRON® COLOR TELEVISION 9-965-898-01 KV-32HS20/36HS20/36HS20H/32XBR450/36XBR450/36XBR450H SECTION 4: CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y183, RM-Y184) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator 4-1. SETTING THE SERVICE ADJUSTMENT MODE 1. Standby mode (Power off). 2. Press the following buttons on the remote commander within one second of each other: Channel 5 Sound Volume + Power DISPLAY 4-2. MEMORY WRITE CONFIRMATION METHOD 1. After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again. 2. Turn the power switch ON and set to Service Mode. 3. Call the adjusted items again to confirm they were adjusted. SERVICE ADJUSTMENT MODE VIEW Device Item Register Item 2150P-1 SBOT 0 Data Item +7 SERVICE TV 4-3. REMOTE ADJUSTMENT BUTTONS AND INDICATORS WSL: 0 F/A FLAG: CBA FLAG: WRITE INTO MEMORY DEVICE UP READING THE MEMORY 1. Enter into service mode. 2. Press 0 on the remote commander. 3. Press ENTER to read memory. ITEM UP ITEM DOWN DATA UP DATA DOWN DEVICE DOWN EXECUTE READ MEMORY ADJUSTING THE PICTURE 1. 2. 3. 4. 5. Enter into service mode Press 2 or 5 on the remote to select the device item. Press 1 or 4 on the remote to select an item. Press 3 or 6 on the remote to change the data. Press MUTING then ENTER to write into memory. TEST RESET 4-1.1 RESETTING THE DATA Note: Be careful when using the remote! It will clear and re-initialize ALL NVM data including deflection adjustment data if not reset properly as follows: RESETTING THE DEFLECTION NVM DATA 1. Enter into service mode. 2. Press 7 , then MENU , and then press ENTER on the remote. RESETTING THE SYSTEM NVM DATA 1. Enter into service mode. 2. Press 7 , then 9 , and then press ENTER on the remote. RESETTING THE SYSTEM NVM DATA 1. Enter into service mode. 2. Press 8 and then press ENTER on the remote. RM-Y183 (KV-32HS20/36HS20/36HS20H ONLY) -- 18 -- KV-32HS20/36HS20/36HS20H/32XBR450/36XBR450/36XBR450H WRITE INTO MEMORY DEVICE UP ITEM UP ITEM DOWN DATA UP DATA DOWN DEVICE DOWN EXECUTE READ MEMORY TEST RESET RM-Y184 (KV-32XBR450/36XBR450/36XBR450H ONLY) -- 19 -- KV-32HS20/36HS20/36HS20H/32XBR450/36XBR450/36XBR450H SERVICE DATA LISTS DX1A-2001* Service List ------ Contents & Notes Category Number & Name #1 # 2-1 # 2-2 # 3-1 # 3-2 # 3-3 # 3-4 # 4-1 # 4-2 # 4-3 #5 #6 #7 #8 #9 # 10 # 11 # 12 # 13 # 14 # 15 # 16 # 17 3D-COMB CXA2103-1 (Main) CXA2103-2 (Sub) CXA2150P-1 CXA2150P-2 CXA2150P-3 CXA2150P-4 CXA2150D-1 CXA2150D-2 CXA2150D-3 CXA2151 D-CONV CXA2026 AP TRUS MID1 MID2 MID3 MID5 OSD SNNR ID1 CCD&VCHIP Device Name mPD64082 CXA2103Q Device Reference Numb