Philips HQ-S964 free download

File name _precision_shaper_©_.pdf

Precision Shaper HQ-S964 Philips Domestic Appliances and Personal Care Service Manual SAP coding: HQS964 PRODUCT INFORMATION General description: The Philishave D-Finer is the first Precision shaper. A precision shaper is a specialized contouring appliance, created for men with specially shaped beards and sideburns. It gives ultimate control for defining precise lines and edges with unlimited styling possibilities. Materials used: - housing parts - others : ABS : POM / steel / Nickel (Shaving foil) NOTES : · In order to guarantee the longest possible workinglife of the battery: - do not charge for more than 24 hours - do not keep the charging unit permanently plugged in - discharge the battery completely once a year by letting the motor run until it stops · If the battery is empty and the consumer wants to trim his beard, the trimmer has to be charged for at least 1.5 hours to have enough power for one trim · The appliance should be charged again, when not used for a long period Features: - 15mm hi-definition trimmer (Maintenance free cutting element: no oiling required) - 17mm miniature foil - Cleaning brush included Product meets the requirements regarding interference suppression on radio and TV. Never use again a deformed housing clamp (5). After the product has been repaired, it should function properly and has to meet the safety requirements as laid down and offically established at this moment. Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification 03/03 HQ-S964 TECHNICAL INFORMATION - Power supply primary (EU) secondary (EU) primary (USA) secondary (USA) - Charging time - Cordless operation time - Charging indication - Dimensions Blister - Weight Blister - Weight product : : : : : : : : : : : Rechargeable (RC) 220 - 240 V - 50/60 Hz 1,6 V - 100 mA 120 V - 60 Hz 1,6 V - 100 mA 10 h (NiCd & NiMh) 40 minutes (NiCd & NiMh) LED on adapter 16 x 9,4 x 24,7 cm 0,38 kg 104 g NOTE (only for USA) : In the time between week 12 - 2003 and week 17 - 2003 (start of production), D350 appliances have been produced with a wrong typeplate text. 1.) The text on the typeplate of such a appliance tells you: USE ONLY WITH DIRECT PLUG IN TRANSFORMER 4203 035 78420 2.) The right text should be: USE ONLY WITH DIRECT PLUG IN TRANSFORMER 4203 030 77990 The typeplate text on the adapter is: MODEL: 4203 030 77990 Be informed, that the adapter is the right one, only the 12NC at the typeplate is wrong on appliances, which were produced in the time between week 12 - 2003 and week 17 - 2003. From week 18 - 2003 onwards the typeplate of the appliance is corrected as shown in point 2. 2-4 DISASSEMBLY- AND RE-ASSEMBLY ADVISE To open the appliance: - remove: Protecting cap (1) Foil housing (2) Housing clamp (5) To exchange the Profiler: - open the appliance - remove: Motion converter (7) Profiler cover (8) HQ-S964 To exchange the Shaving foil assy (3): Push slightly, till the shaving foi