brother fax150 free download

File name BrotherFAX150userguide.pdf

1. 2. 3. 4. 5. Setting the time and date Setting Password RTI & TTI User Switches System config. Brother FAX150 User guide 1. On first power up of the Fax machine the time must be set in order for the unit to time and date "Stamp" any sent or received faxes. Hold down the STOP and START/COPY Buttons for approximately 6 seconds, At this point the FINE/PHOTO LED's will illuminate. Press the "Grey" button directly below these lamps one time the LED above the START/COPY button will now illuminate, Press this once and the time and date will be printed. Changing the Time and Date *********** CURRENT DATE AND TIME *********** * * * 25/02/02 18:14:05 * * * The Format is DD/MM/YY Hr's:Min's: Sec's Press the grey "FINE/PHOTO" button to set the first digit of the Hour Then press START/COPY to move to the second digit, Continue this until time and date are set e.g. 15 March 2002 @ 9:30PM would be 15/03/02 21:30:00 Button FINE/PHOTO Presses 2 1 1 1 3 1 10 1 1 1 5 1 10 1 3 1 10 1 2 1 START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY TIME 21:30 21:30 21:30 21:30 DATE 15/03/02 15/03/02 15/03/02 15/03/02 15/03/02 15/03/02 Note: Any Zeros are ten presses When the START/COPY Button Has been pressed for the last time You will be asked if you wish to make the changes to the time if yes press the START/COPY button again if not press " STOP" and you can re-set the time. ***** DO YOU WISH TO MAKE THE FOLLOWING CHANGE ? ***** * * * 15/03/02 21:30:00 * * * 2. Setting Password: Hold down the STOP and START/COPY Buttons for approximately 6 seconds, At this point the FINE/PHOTO LED's will illuminate. Press the "Grey" button directly below these lamps three times the LED above the START/COPY button will now illuminate, Press this one time then the FINE/PHOTO button ONCE followed by he START/COPY button this will then force the machine to print the current FAX Password number. *********** CURRENT FAX PASSWORD *********** * * * FAX PASSWORD : 0000 * * * SETTING PASSWORD: Button FINE/PHOTO START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY FINE/PHOTO START/COPY Presses 1 1 2 1 3 1 4 1 PASSWORD 1234 1234 1234 1234 When the START/COPY Button Has been pressed for the last time You will be asked if you wish to make the changes to the Password if yes press the START/COPY button again if not press " STOP" and you can re-set the Password. ***** DO YOU WISH TO MAKE THE FOLLOWING CHANGE ? ***** * * * NEW PASSWORD : 1234 * * * 3. RTI/TTI Number: This is usually set as the telephone number the machine is connected to, this is transmitted with any documents sent as a header on the page for identifying the sender along with the station ID. Setting: Hold down the STOP and START/COPY Buttons for approximately 6 seconds, At this point the FINE/PHOTO LED's will illuminate. Press the "Grey" button directly belo