Toshiba 21V33E2 free download

File name TOSHIBA 21V33E2.pdf

SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter the Service Mode, press both set key and remote control key for more than 2 seconds. Set Key Remocon Key Operations Reset the user setting items (PICTURE, VOLUME and LANGUAGE) to the initial state VOL. (-) MIN 0 for delivery. Initialization of the factory. NOTE: Do not use this for the normal servicing. VOL. (-) MIN 1 If you set a factory initialization, the memories are reset such as the channel setting, and the POWER ON total hours. POWER ON total hours is displayed on the screen. Refer to the "CONFIRMATION OF HOURS USED". VOL. (-) MIN 6 Can be checked of the INITIAL DATA of MEMORY IC. Refer to the "WHEN REPLACING EEPROM (MEMORY) IC". Writing of EEPROM initial data. VOL. (-) MIN 8 NOTE: Do not use this for the normal servicing. Display of the Adjustment MENU on the screen. VOL. (-) MIN 9 Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display Adjustment). CONFIRMATION OF HOURS USED POWER ON total hours can be checked on the screen. Total hours are displayed in 16 system of notation. NOTE: If you set a factory initialization, the total hours is reset to "0". 1. Set the VOLUME to minimum. ADDRESS DATA 2. Press both VOL. DOWN button on the set and Channel button (6) on the remote control for more than 2 seconds. 3. After the confirmation of using hours, turn off the power. INIT 01 00 Initial setting content of MEMORY IC. CRT ON 0010 POWER ON total hours. = (16 x 16 x 16 x thousands digit value) + (16 x 16 x hundreds digit value) + (16 x tens digit value) FIG. 1 + (ones digit value) WHEN REPLACING EEPROM (MEMORY) I