Braun 4005 free download

File name shaver_®_.pdf

Service Documentation Braun Pocket Twist Plus 375 Market Release 4/97 5615 5615 BINC Rev: 4/97 BAG Rev: 1/97 Service Documentation Exploded Drawing 5615 5615 - 2 BINC Rev: 4/97 BAG Rev: 1/97 Service Documentation Spare Parts List 5615 Part Description Shaving foil frame Cutter block Cleaning brush Pos. No. 7 8 24 Part Number 5614763 5524761 5524780 This shaver is a non-serviceable item. Refer to the Inventory Recommendations for Non-serviceable Products page in the Braun price book for article numbers when replacing the unit under warranty. 5615 - 3 BINC Rev: 4/97 BAG Rev: 1/97 Service Documentation Service Information 5615 Technical Data Principle Housing Shaving head: Cutter block: Long hair trimmer: Drive: Power transmission: Power supply: Amplitude: Revolutions: Working current: Operating capacity: Dismantling Protective caps (1, 22): Remove cleaning brush (24). Take off screw (21). Pull apart the protective caps (1) and (22), and lever them, one after the other, from the housing shelves. To be unlocked through unlocking pins and to be removed. To be extracted. Remove circlip (9). Take off cutter block support (10) with ring seal and conical coil spring (11). 5615 - 4 Battery operated shaver with switch-on protection and foldable long hair trimmer. Plastic material Plastic frame with integrated shaving foil. 30 blades, 3° inclined, 10 mm diameter, plastic frame. Integrated in the housing upper part; can be additionally switched on by a separate slider. 2.7 V DC motor. via eccenter and oscillating frame onto the shaving system. by 2 Mignon batteries 1.5 V (type LR6, AM3, MN 1500/AA alkaline) Approx. 2.3 mm, measured at the cutter block. Approx. 6200 r.p.m. (with new batteries) Approx. 5500 r.p.m. (by 2.4 V minimum) Approx. 500 mA (without long hair trimmer) Approx. 60 shaving minutes. Shaving foil frame (7): Cutter block (8): Cutter block support (10): BINC Rev: 4/97 BAG Rev: 1/97 Service Documentation Service Information 5615 Remove batteries. Unscrew the 3 housing screws (19). By means of a grip ring pliers inserted into the battery box, press apart the housing shelves (3) and (20), one after the other (see exploded drawing "A"). Attention: When opening the housing shelves, the spring catches (17) will snap out. Before extracting the motor, the slider (2) must be switched in the 'on' position. Snap out the motor from the direction of the eccenter and remove it together with the minus contact. Attention: When extracting the motor please take care that the spring wire (15) does not get lost. (Mostly the wire sticks to the motor through the magnetic effect.) All further dismantling steps do not require further explanation. Open housing: Motor (16): Reassembly The reassembly is made in reversed order. Attention must be paid to the following: Battery contacts (13, 14): Before inserting the plus contact (14) into the housing upper part (3), please absolutely make sure that the slider (2) is adjusted in the 'on' position. Wh