SONY HVL-LBPA free download

File name SONY HVL-LBPA SERVICE MANUAL VER 1.0 2008.10 (9-852-627-11).pdf

HVL-LBPA SERVICE MANUAL Ver. 1.0 2008.10 US Model Canadian Model AEP Model Chinese Model SPECIFICATIONS Power source Sony "InfoLITHIUM" battery pack L series (NP-F900 range, NP-F700 range) DC 7.2 V Power consumption Approx. 16 W Maximum luminosity Approx. 600 lux (1 m (3 1/5 ft.)) (When using the condenser lens) Lighting direction Lighting angle Vertical Approx. 45 degrees Horizontal Approx. 60 degrees (When not using the condenser lens) Continuous lighting time Approx. 3 hours (When using a fully charged NP-F970 and the BRIGHT dial is set to MAX at an ambient temperature of 25 °C (70 °F)) Approx. 2 hours (When using a fully charged NP-F770 and the BRIGHT dial is set to MAX at an ambient temperature of 25 °C (70 °F)) Lighting distance Approx. 1 m (3 1/5 ft.) 600 lux Approx. 3 m (9 4/5 ft.) 66 lux Approx. 5 m (16 1/2 ft.) 24 lux Approx. 8 m ( 26 1/3 ft.) 9 lux Approx. 10 m (32 4/5 ft.) 6 lux Color temperature Approx. 5,500 K (Default setting with the BRIGHT dial is set to MAX at an ambient temperature of 25 °C (70 °F)) Approx. 3,200 K (Default setting with the BRIGHT dial is set to MAX at an ambient temperature of 25 °C (70 °F)) (When the supplied color conversion filter is attached to the video light) Operating temperature 0 °C to 40 °C (35 °F to 104 °F) Storing temperature -20 °C to +60 °C (-4 °F to +140 °F) Dimensions Approx. 108 x 150 x 129 mm (w/h/d) (4 3/8 x 6 x 5 1/8 in.) Mass (Video light only) Approx. 420 g (14.9 oz.) Included items Battery video light (1) Battery adaptor cord (Cord part Approx. 1.2 m (3 4/5 ft.)) (1) Color conversion filter (1) Set of printed documentation Design and specifications are subject to change without notice. "InfoLITHIUM" is a trademark of Sony Corporation. BATTERY VIDEO LIGHT HVL-LBPA 9-852-627-11 Sony EMCS Co. 2008J0200-1 © 2008.10 Published by Kohda TEC 1. SERVICE NOTES 1-1. ATTENTION WHEN ASSEMBLING BATTERY ADAPTOR Velcro side 95mm Magic tape (hook side) On assembling magic tape, set 95mm length the hook side. On disassembling, be sure not to lose lock spring and battery lock button. Lock spring Battery lock button On disassembling, be sure not to cut lead wires. On assembling, be sure not to get lead wires Two screws (2X6) caught in the case. Two screws (2X6) 1-2. METHOD OF SETTING THE CORD Case (upper (battery)) On assembling, arrange the cord as shown in the figure. Cord HVL-LBPA 1-1 2. EXPLODED VIEWS NOTE: · Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. · Abbreviation CH: Chinese model CND: Canadian model The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiйs par une marque 0 sont critiques pour la sйcuritй. Ne les remplacer que par une piиce portant le numйro spйcifiй. 2-1. MAIN SECTION ns: not supplied 8 6 8 3 ns 2 (Note) 5 4 7 1 9 9 8 2 (Note) 8 Note : These parts are a couple