File information: | |
File name: | SONY HDR-CX11E, CX12, CX12E SECTION 6 ADJUSTMENTS AUTO-ADJ VER 1.1 2008.10 (9-852-601-52).rar [preview HDR-CX12] |
Size: | 715 kB |
Extension: | |
Mfg: | SONY |
Model: | HDR-CX12 🔎 HDRCX12 |
Original: | 9-852-601-52 🔎 |
Descr: | SONY HDR-CX11E, CX12, CX12E DIGITAL HD VIDEO CAMERA RECORDER. SECTION 6 ADJUSTMENTS VERSION 1.1 2008.10 PART#(9-852-601-52) |
Group: | Electronics > Consumer electronics > Video cameras |
Uploaded: | 26-07-2009 |
User: | endless |
Multipart: | No multipart |
Information about the files in archive: | ||
Decompress result: | OK | |
Extracted files: | 1 | |
File name SONY HDR-CX11E, CX12, CX12E SECTION 6 ADJUSTMENTS AUTO-ADJ VER 1.1 2008.10 (9-852-601-52).pdf HDR-CX11E/CX12/CX12E RMT-835 Ver. 1.1 2008.10 Revision History SECTION 6 ADJUSTMENTS Auto-ADJ Link Before starting adjustments Adjusting items when replacing main parts and boards List of service tools SERVICE MODE APPLICATION FOR ADJUSTMENT (SeusEX) SERVICE MODE DATA BACKUP CAMERA SECTION ADJUSTMENTS PREPARATIONS BEFORE ADJUSTMENTS ADJUSTMENT PROGRAM DESTINATION DATA WRITE USB SERIAL No. INPUT VIDEO SYSTEM ADJUSTMENTS CAMERA SYSTEM ADJUSTMENTS LCD SYSTEM ADJUSTMENTS AUDIO SYSTEM ADJUSTMENTS ERROR · Use this Service Manual together with the Automatic Adjustment Program (HDR-CX12 Series Auto-Adj Ver_1.1r02.exe). HDR-CX11E/CX12/CX12E_ADJ 9-852-601-52 Sony EMCS Co. 2008J0500-1 © 2008.10 Published by Kohda TEC 6. ADJUSTMENTS Before starting adjustments 1-1. Adjusting items when replacing main parts and boards When replacing main parts and boards, adjust the items indicated by z in the following table. Note 1: The Automatic Adjustment Program does not support. Note 2: IC2101 (Flash memory) on the VC-535 board cannot be replaced. Note 3: If the VC-535 board was replaced, replace the LD-241 board at the same time, or replace the angular velocity sensor with the repair part. Replaced parts Block replacement Parts replacement Board replacement CMOS block assy (Including CM-094 board and CMOS imager) LD-241 board SE9001 (PITCH sensor) VC-535 board SE1001 (YAW sensor) Adjusting item Adjustment VC-535 board IC2801 (Video, Audio processor) VC-535 board X1301 (Clock generator) PD-371 board IC6201 (LCD drive) LCD block LCD901 (LCD panel) VC-535 board (COMPLETE) z z z z z z z z z z z z z z z z LD-241 board (COMPLETE) VC-535 board IC2401 (SOC) Destination Data Write USB Serial No. Input (Note 1) S VIDEO OUT and VIDEO OUT adjustment COMPONENT OUT adjustment CAMERA adjustment 1 CAMERA adjustment 2 CAMERA adjustment 3 CAMERA adjustment 4 Destination data write USB serial No. input Origin oscillation check S VIDEO OUT Y level adj. S VIDEO OUT chroma level adj. VIDEO OUT level check COMPONENT OUT Y level adj. COMPONENT OUT Pb level adj. COMPONENT OUT Pr level adj. STEADY HALL adj. HALL & MR adj. Flange back adj. Flange back check F No. & ND light qualiy standard data input Mechanical shutter adj Linear matrix adj. AWB standard data input LV standard data input AWB adj. Color reproduction adj. & check MAX GAIN adj. White defect adj. Black defect adj. Strobe light level & white balance adj. GYRO sensor sensitivity adj. (Note 3) LCD automatic adj. V-COM adj. Transmissive mode white balance adj. Reflective mode white balance adj. Sample hold phase adj. Touch panel adj. Internal 3ch microphone sensitivity and phase adj. z z z z z z z z z z z z z CAMERA adjustment 5 z z CAMERA adjustment 6 CAMERA adjustment 7 CAMERA adjustment 8 LCD adjustment Touch panel adjustment AUDIO adjustment z z z z z z z z z z z z Table 6-1-1 HDR-CX11E/CX12/CX12E_ADJ 6-1 PD-371 board (COMPLETE) Microphone unit MIC901 Lens device Flash unit Ver. 1.1 2008.1 |
Date | User | Rating | Comment |