Braun Saphir Jet PV 2512 free download

File name 4692_iron_©_.pdf

Service Documentation Braun OptiGlide - Jet Market Release 4/98 PV 2250 4692 4692 BINC Rev: 3/98 BAG Rev: 2/98 Service Documentation Exploded Drawing 4692 4692 - 2 BINC Rev: 9/99 BAG Rev: 2/98 Service Documentation Spare Parts List 4692 Part Description Sole plate Spacer tube Seal Valve nozzle Lower housing Screw Tube Screw Reflector Thermostat lever Slider Container cpl. Seal for container Screw Jet pump cpl. Spray/supershot pump cpl. Temperature control knob Upper housing Screw Pilot-light window Steam regulating knob Mains lead with PCB Cable clamp Screw Cover plate Screw PCB Cable clip Swivel bearing Measuring beaker Pos. No. 1 2 3 4 5 6 7 8 10 11 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 Part Number not for exchange 4316656 4316626 4316627 4693623 4316631 4316628 4316632 4316630 4316633 4316641 4692634 4316647 4318625 4316636 4314622 4691631 4692635 4318626 4693626 4318630 NLA 4318627 4318629 4692636 4318628 see position 23 4316651 4316653 4316649 4692 - 3 BINC Rev: 3/98 BAG Rev: 2/98 Service Documentation Service Information 4692 Technical data: Nominal voltage: Nominal frequency: Nominal power: Sole plate temperature: 120 V 50 - 60 Hz 1200 W Maximum: · ·· ··· Normal: 230 - 240 °C < 110 °C < 150 °C < 200 °C 12-16 g/min Only works in horizontal position. 0.1-0.4 g/operation 0.1-0.8 g/operation 0.1-0.8 g/operation 1 - 2.2 g/operation Only works in horizontal position Flow quantities: Jet: Super shot: Spray: Extra steam: Automatic shut-off: Mercury free. Yellow pilot light will flash when automatic shut-off is activated within approx.30 seconds if the iron is standing in horizontal position without being moved. 15 minutes if the iron is standing in vertical position without being moved. approx. 215 ml Die-cast metal, ceramic-coated (71 steam vents) Glow lamp approx. 1.95 Meters Measuring beaker The fuse and the thermostat may not be altered. The contacts may neither be bent, re-bent or re-soldered nor may they be bridged in any way. The special screws used in the device can only be untightened by means of a special screwdriver blade. For reasons of approbation and security, only these special screws are to be used. Capacity, container: Sole plate: Temperature display: Length of mains lead: Accessory: Important: Special screws: 4692 - 4 BINC Rev: 3/98 BAG Rev: 2/98 Service Documentation Service Information 4692 Disassembly: Unscrew the screws (25) and remove the cover plate (26) to the backside. Unscrew the screws (27) and remove the swivel bearing (30) from the upper housing (18). Pull the glow lamp (28) out of the handle by the connecting leads. Disconnect all electrical plug-in connections. The mains lead (23) is provided with self-securing plug-in connectors; the securing pins must be pressed slightly backwards during the disassembling process. Due to UL regulations, the glow lamp (28) and the mains lead (23) cannot be separated from each other and must be replaced as one part only. Turn the steam reg