SONY SPP-N1020 free download

File name SONY SPP-N1020, N1021 SERVICE MANUAL VER 1.1 2001.12 (9-873-146-12).pdf

SPP-N1020/N1021 SERVICE MANUAL Ver 1.1 2001.12 US Model SPP-N1020 Canadian Model SPP-N1021 Photo: SPP-N1020 SPECIFICATIONS General Operating frequency Operating channel Dial signal Supplied accessories Base unit: 902 - 905 MHz (310 µw) Handsset: 925 - 928 MHz (400 µw) 30 channels Tone, 10 PPS (pulse) selectable AC power adaptor AC-T130 Telephone line cord Rechargeable battery pack BP-T18 Belt clip Wall bracket Handset Power source Battery life Dimensions Rechargeable battery pack BP-T18 Standby: Approx. 7 days Talk: Approx. 7 hours Approx. 2 1/4 x 1 7/8 x 7 1/4 inches (w/h/d), antenna excluded (approx. 55 x 47 x 183 mm) Antenna: Approx. 1 3/8 inches (approx. 34 mm) Approx. 7.7 oz (approx. 220 g), battery included Mass Base unit Power source Battery charging time Dimensions DC 9V from AC power adaptor AC-T130 Approx. 12 hours Approx. 5 x 2 1/4 x 7 1/2 inches (w/h/d), antenna excluded (approx. 127 x 55 x 189 mm) Antenna: Approx. 6 1/8 inches (approx. 153 mm) Approx. 9 oz (approx. 250 g), wall bracket excluded Mass Design and specifications are subject to change without notice. CORDLESS TELEPHONE 9-873-146-12 2001L0500-1 C 2001.12 Sony Corporation Personal Audio Company Published by Sony Engineering Corporation SPP-N1020/N1021 SECTION 1 SERVICING NOTES TABLE OF CONTENTS 1. 2. SERVICING NOTES ... 2 GENERAL Set Up the Base Unit ... Install the Battery Pack ... Charge the Battery Pack ... Change the Display Language ... Choose the Dialing Mode ... Making Calls ... Receiving Calls ... One-touch Dialing ... Phone Directory ... Using Caller ID Service ... 4 4 4 5 5 6 6 6 7 7 NOTE FOR REPLACEMENT OF THE EEPROM The ID cord is written in the EEPROM. When replacing the EEPROM, U6 on the BASE MAIN board and U4 on HAND MAIN board should be replaced together as a pair. (Parts No. X-3381-081-1) PRIOR CHECK FOR SERVICING This set can rewrite the ID number of handset to the ID number of base unit in the test mode even their serial numbers are different. You can find which is wrong, handset or base unit with this function. Note: A normal set is needed for this test. Define A as the normal set and B as the faulty set. Disconnect their power. 3. 3-1. 3-2. 3-3. 3-4. 3-5. 3-6. DISASSEMBLY Disassembly Flow ... H/S Rear Assy ... H/S FRT Assy ...