SONY RDRHX900 free download

File name sony-rdr-hx900 [1].pdf

RDR-HX900 RMT-D206P SERVICE MANUAL Revised-1 AEP Model UK Model SPECIFICATIONS System Laser: Semiconductor laser Channel coverage: PAL/SECAM (B/G, D/K, I, L) VHF: E2 to E12, R1 to R12, F1 to F10, Italian A to H, Ireland A to J, South Africa 4 to 13/ UHF: E21 to E69, R21 to R69, B21 to B69, F21 to F69/CATV: S01 to S05, S1 to S20, France B to Q/HYPER: S21 to S41 The above channel coverage merely ensures the channel reception within these ranges. It does not guarantee the ability to receive signals in all circumstances. Video reception: Frequency synthesizer system Audio reception: Split carrier system Aerial out: 75-ohm asymmetrical aerial socket Timer: Clock: Quartz locked/Timer indication: 24-hour cycle (digital)/Power back-up duration: 1 hour Video recording format: MPEG Video Audio recording format/applicable bit rate: Dolby Digital/2 ch, 256 kbps When you play PCM sound tracks with a 96 kHz sampling frequency, the output signals from the DIGITAL OUT (OPTICAL or COAXIAL) jack are converted to 48 kHz sampling frequency. LINE 1 -TV: 21-pin CVBS IN/OUT S-Video/RGB OUT (upstream) LINE 3/DECODER: 21-pin CVBS IN/OUT S-Video/RGB IN S-Video OUT (downstream) Decoder DV IN: 4-pin/i.LINK S100 DIGITAL OUT (OPTICAL): Optical output jack/­18 dBm (wave length: 660 nm) DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms COMPONENT VIDEO OUT (Y, PB/CB, PR/CR): Phono jack/Y: 1.0 Vp-p, PB/CB: 0.7 Vp-p, PR/CR: 0.7 Vp-p General Power requirements: 220-240 V AC, 50/60 Hz Power consumption: 54 W Dimensions (approx.): 430 Ч 89 Ч 346 mm (width/height/depth) incl. projecting parts Hard disk drive capacity: 160 GB Mass (approx.): 5.9 kg Operating temperature: 5 єC to 35 єC Operating humidity: 25 % to 80 % Supplied accessories: Audio/video cord (1) Mains lead (1) Aerial cable (1) Remote commander (remote) (1) R6 (size AA) batteries (2) Specifications and design are subject to change without notice. Inputs and outputs LINE 2 OUT (AUDIO): Phono jack/2 Vrms/10 kilohms (VIDEO): Phono jack/1.0 Vp-p (S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3 Vp-p (PAL) LINE 2 IN/LINE 4 IN (AUDIO): Phono jack/2 Vrms/more than 22 kilohms (VIDEO): Phono jack/1.0 Vp-p (S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3 Vp-p (PAL) DVD RECORDER WARNING!! WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK. Unleaded solder Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) CAUTION: The use of optical instrument with this product will increase eye hazard. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. SAFETY-RELATED COMPONENT W