CAudio Pulse series free download

File name CAudio-PulseSeries pwramp.pdf

TE C H N I CAL S PE C I F I CATI O N S Pulse Series Power Ratings Pulse 4x300 Into 8 Ohms Into 4 Ohms Into 2 Ohms 170W 300W 330W Cooler, Lighter, Stronger The Pulse Series combines state-of-the-art switched mode power supplies to not only reduce amplifier weight by as much as 70% compared to conventional amps, but also to provide solid, consistent performance at all power levels. Occupying just 2U of rack space, Pulse uses massive heatsinks and front-venting fans to keep the electronics really cool, plus a built-in microprocessor which continually monitors all the protection aspects of Pulse - these factors all dramatically enhance reliability. Pulse amplifiers will perform for longer periods than conventional amplifiers at high output levels. The combination of the switched mode PSU and a rugged steel chassis means inherent strength. Technical Specifications Power Ratings 8 Ohms 4 Ohms 2 Ohms Bridged Mono 16 Ohms 8 Ohms 4 Ohms Pulse 4x300 170Wrms 300Wrms 330Wrms* Pulse 2x650 400Wrms 650Wrms 850Wrms* Pulse 2x1100 700Wrms 1100Wrms 1500Wrms* Measured per channel, both channels driven at 1kHz to no more than 0.1% THD+N Pulse 2x650 Into 8 Ohms Into 4 Ohms Into 2 Ohms 400W 650W 850W * Note: 2 Ohm spec is at 1% THD Pulse 2x1100 Into 8 Ohms Into 4 Ohms Into 2 Ohms 700W 1100W 1500W 400Wrms 600Wrms 660Wrms* 800Wrms 1300Wrms 1700Wrms* 1200Wrms 2200Wrms 3000Wrms* * Note: 4 Ohm bridged spec is at 1% THD Input Sensitivity Input Impedance Distortion +1dBu for full output 20kOhm <0.006% THD, 1kHz, 1dB below clip, 22kHz measurement bandwidth 20Hz to 20kHz, +0/-0.2dB; <2Hz to >120kHz +0/-3dB Power switch, bridge mode switching, indented level controls (these may be made tamper-proof) Mains present, Operate, Signal, Bridge, Clip, Overtemperature, Protect, Remote Microprocessor supervised: overtemperature, DC on outputs, output stage overload, inrush current surge, mains fail and brownout. <-100dB ref full output 20Hz - 20kHz measurement bandwidth >50 V/microsecond >200 ref 8 Ohm Benefits of the Pulse Series · Very light weight · Switched mode power supplies give solid performance at all power levels · Microprocessor protection system · Massive heatsinks for cooler operation and higher reliability · Binding Post or Speakon output connector options · Optional Remote control via C Audio CONNECT · Internal crossover card options Frequency Resp. Controls Indicators Protection Noise Slew Rate Damping Factor Output Connectors 4x300 - Binding post or Speakon 2x650, 2x1100 - Binding post and Speakon Power 115 or 230 volts AC nominal, internally selectable, 2000VA, all channels driven (4x300, 2x650); 3000VA (2x1100) Dimensions 3.5" (89mm) x 18.2" (460mm) x 19" (483mm) - with rear rack ears depth 19.5", -21", 20" (494, 511, 530mm) Weight 24lbs (11kg) Trade Descriptions Act: C Audio have a policy of continued product improvement and accordingly reserve the right to change features and specifications without prior notice. March 2000 Pulse P2X1100 circuit