Denon AVR2802 free download

File name Denon-AVR2802 rec.pdf

For U.S.A., Canada, Europe, Asia, China, Hong Kong & Taiwan R.O.C. model Hi-Fi Component SERVICE MANUAL MODEL AVR-2802/982 AV SURROUND RECEIVER Some illustrations using in this service manual are slightly different from the actual set. 14-14, AKASAKA 4-CHOME, MINATO-KU, TOKYO 107-8011 JAPAN Telephone: 03 (3584) 8111 X0119 1174 NC 0112 AVR-2802/982 SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the unit is defective. SPECIFICATIONS AUDIO SECTION Power Amplifier Rated output: Front: 90W + 90W (8/ohms, 20Hz ~ 20kHz with 0.05% T.H.D.) 135W + 135W (6/ohms, 1kHz with 0.7% T.H.D.) 150W + 150W (6/ohms, EIAJ) Center: 90W (8/ohms, 20Hz ~ 20kHz with 0.05% T.H.D.) 135W (6/ohms, 1kHz with 0.7% T.H.D.) 150W (6/ohms, EIAJ) Surround: 90W + 90W (8/ohms, 20Hz ~ 20kHz with 0.05% T.H.D.) 135W + 135W (6/ohms, 1kHz with 0.7% T.H.D.) 150W + 150W (6/ohms, EIAJ) Surround Back: 90W (8/ohms, 20 Hz ~ 20kHz with 0.05% T.H.D.) 135W (6/ohms, 1kHz with 0.7% T.H.D.) 150W (6/ohms, EIAJ) 120W Ч 2ch (8/ohms) 170W Ч 2ch (4/ohms) 200W Ч 2ch (2/ohms) Front: A or B 6 ~ 16/ohms A + B 8 ~ 16/ohms Center, Surround, Surr.Back: 6 ~ 16/ohms Dynamic power: Output terminals: Analog Input sensitivity/input impedance: Frequency response: S/N: Distortion: Rated output: 200mV/47k/kohms 10Hz ~ 100kHz: +0, -3dB (DIRECT mode) 102dB (DIRECT mode) 0.005% (20Hz ~ 20kHz) (DIRECT mode) 1.2V Rated output 2V (at 0dB playback) Total harmonic distortion 0.008% (1 kHz, at 0 dB) S/N ratio 102dB Dynamic range 96dB Format Digital audio interface 2.5mV ±1dB (20Hz to 20kHz) 74dB (A weighting, with 5mV input) 150mV/7V 0.03% (1kHz, 3V) Digital D/A output: Digital input: Input sensitivity: RIAA deviation: Signal-to-noise ratio: Rated output/Maximum output: Distortion factor: Phono equalizer (PHONO input REC OUT) VIDEO SECTION Standard video jacks Input/output level and impedance: Frequency response: 1Vp-p, 75/ohms 5Hz ~ 10MHz +0, -3dB Y (brightness) signal 1Vp-p, 75/ohms C (color) signal 0.286Vp-p, 75/ohms 5Hz ~ 10MHz +0, -3dB Y (brightness) signal 1Vp-p, 75/ohms PB/CB (blue) signal 0.7Vp-p, 75/ohms PR/CR (red) signal 0.7Vp-p, 75/ohms 5Hz ~27MHz +0, -3dB [FM] (note: µV at 75/ohms, 0dBf=1 Ч 10-15 W) 87.50MHz ~ 107.90MHz (for U.S.A., Canada and multiple voltage models) 87.50MHz ~ 108.00MHz (for Europe, Asia, China, Hong Kong, Taiwan R.O.C. and Multiple voltage models) 1.0µV (11.2dBf) MONO: 1.6µV (15.3dBf) STEREO: 23µV (38.5dBf) MONO: 77dB STEREO: 72dB MONO: 0.15% STEREO: 0.3% S-video jacks Input/output level and impedance: Frequency response: Color component video jacks Input/output level and impedance: Frequency res