Onkyo DTR5.3 free download

File name Onkyo-DTR5.3jp rec.pdf

DTR-5.3 Ref. No. 3732 SERVICE MANUAL May, 2002 AV RECEIVER MODEL DTR-5.3 Black model BMDD 120V AC, 60Hz RC-481M SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLACE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. DTR-5.3 SPECIFICATIONS AMPLIFIER SECTION Continuous average power output (FTC) All channels: 80 W per channel min. RMS at 8 ohm, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 105 W min. RMS at 6 ohm, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion. Continuous power output (DIN) 115 W at 6 ohm Maximum power output (EIAJ) 145 W at 6 ohm Dynamic power output (stereo) 2 215 W at 3 ohm 2 160 W at 4 ohm 2 95 W at 8 ohm Total harmonic distortion: 0.08% at rated power 0.08% at 1 W output IM distortion: 0.08% at rated power 0.08% at 1 W output Damping factor: 60 at 8 ohm Input sensitivity and impedance LINE (CD, TAPE, DVD, VIDEO 1-4): 200 mV, 47 kohm MULTICHANNEL INPUT (FRONT L/C/R, SURROUND L/R): 200 mV, 47 kohm (SUBWOOFER): 36 mV, 47 kohm COAXIAL (DIGITAL): 0.5 Vp-p, 75 ohm DVD, VIDEO 1, 2, 3, 4: 1 Vp-p, 75 ohm 1 Vp-p, 75 ohm (Y) 0.28 Vp-p, 75 ohm (C) COMPONENT VIDEO 1, 2: 1 Vp-p, 75 ohm (Y) 0.7 Vp-p, 75 ohm (PB, PR) Output level and impedance Rec out (TAPE, VIDEO 1): 200 mV, 470 ohm Pre out: 1 V, 470 ohm VIDEO (VIDEO 1, MONITOR OUT): 1 Vp-p, 75 ohm 1 Vp-p, 75 ohm (Y) 0.28 p-p, 75 ohm (C) COMPONENT VIDEO OUT: 1 Vp-p, 75 ohm (Y) 0.7 Vp-p, 75 ohm (PB, PR) Frequency response: 10 Hz to 100 kHz:+1/-3 dB (CD in Direct mode) Tone control Bass: ±12 dB at 50 Hz Treble: ±12 dB at 20,000 Hz Signal-to-noise ratio (stereo) CD/Tape: Muting: 100 dB (IHF A, 0.5 V input) - 50 dB TUNER SECTION FM Tuning range: Usable sensitivity Mono: Stereo: 50 dB quieting sensitivity Mono: Stereo: Capture ratio: Image rejection ratio IF rejection ratio: Signal-to-noise ratio Mono: Stereo: Alternate channel attenuation: Selectivity: AM suppression ratio: Total harmonic distortion Mono: Stereo: Frequency response: Stereo separation: AM Tuning range Usable sensitivity: Image rejection ratio: IF rejection ratio: Signal-to-noise ratio: Total harmonic distortion: GENERAL Power supply Power consumption Dimensions (W H D): Weight REMOTE CONTROLLER Transmitter: Signal range: Power supply: 87.5 -108.0 MHz (50-kHz steps) 11.2 dBf, 1.0 µV (75 ohm IHF) 0.9 µV (75 ohm DIN) 17.2 dBf, 2.0 µV (75 ohm IHF) 23 µV (75 ohm DIN) 17.2 dBf, 2.0 µV (75 ohm ) 37.2 dBf, 20 µV (75 ohm ) 2.0 dB 40 dB 90 dB 76 dB 70 dB 55 dB 50 dB (DIN) 50 dB 0.2% 0.3% 30 Hz - 15 kHz, ±1.0 dB 45 dB at 1 kHz 30 dB at 100 Hz - 10 kHz 530 to 1,710 kHz (10-kHz steps) 30 µV 40 dB 40 dB 40 dB 0.7% AC 120 V, 60 Hz 5.5 A 17-1