Onkyo TXSR800 free download

File name Onkyo-TXSR800 rec.pdf

TX-SR800 Ref. No. 3754 112002 SERVICE MANUAL AV RECEIVER MODEL TX-SR800 DISPLAY DIMMER REC OUT ZONE 2 OFF MASTER VOLUME STANDBY/ON SETUP TUNING ENTER STANDBY POWER PRESET RETURN ON OFF DIRECT / PURE AUDIO STEREO SURROUND THX DSP MEMORY FM MODE A-FORM LISTENING MODE MEMORY PURE AUDIO UPSAMPLING CLEAR PHONES AUDIO SELECTOR ZONE 2 ( GRN ) REC ( RED ) DVD VIDEO 1 VIDEO 2 VIDEO 3 VIDEO 4 VIDEO 5 TAPE TUNER PHONO CD VIDEO 5 INPUT VCR 1 VCR 2 DIGITAL S VIDEO VIDEO L AUDIO R -SR800 TX Black and Golden models BMDD,BMDC BMPA,GMPA BMWT,GMWT,GMWR GMGT 120V AC, 60Hz 230~240V AC, 50Hz 120/220~230V AC, 50/60Hz 220V AC, 50Hz SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLACE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. TX-SR800 SPECIFICATIONS AMPLIFIER SECTION Continuous average power output (FTC) All channels: 100 W per channel min. RMS at 8 Ohm, 2 channels driven from 20 Hz to 20 kHz with no more than 0.08% total harmonic distortion. 130 W min. RMS at 6 Ohm, 2 channels driven from 1 kHz with no more than 0.1% total harmonic distortion. Continuous power output (DIN) 135 W at 6 Ohm Maximum power output (EIAJ) 160 W at 6 Ohm Dynamic power output (stereo) 2 x 250 W at 3 Ohm 2 x 210 W at 4 Ohm 2 x 130 W at 8 Ohm Total harmonic distortion: 0.08% at rated power 0.08% at 1 W output IM distortion: 0.08% at rated power 0.08% at 1 W output Damping factor: 60 at 8 Ohm Input sensitivity and impedance PHONO: 2.5 mV, 50 k ohm LINE (CD, TAPE, DVD, VIDEO 1-5): 200 mV, 50 k ohm MULTICHANNEL INPUT (FRONT L/C/R, SURROUND L/R, SURROUND BACK L/R): 200 mV, 50 k ohm (SUBWOOFER): 36 mV, 50 k ohm COAXIAL 1, 2, 3 (DIGITAL): 0.5 Vp-p, 75 Ohm DVD, VIDEO 1, 2, 3, 4, 5: 1 Vp-p, 75 Ohm 1 Vp-p, 75 Ohm (Y) 0.28 Vp-p, 75 Ohm (C) COMPONENT VIDEO 1, 2: 1 Vp-p, 75 Ohm (Y) 0.7 Vp-p, 75 Ohm (P B, PR ) Output level and impedance Rec out (TAPE, VIDEO 1, 2): 200 mV, 470 Ohm Pre out: 1 V, 470 Ohm VIDEO (VIDEO 1, 2, MONITOR OUT, ZONE 2 OUT): 1 Vp-p, 75 Ohm 1 Vp-p, 75 Ohm(Y) 0.28 p-p, 75 Ohm (C) COMPONENT VIDEO OUT: 1 Vp-p, 75 Ohm(Y) 0.7 Vp-p, 75 Ohm (P R , P B) Phono overload: 120 mV RMS at 1 kHz, 0.5% T.H.D. Frequency response: 10 Hz to 100 kHz : +1/ ­3 dB (CD in Direct mode) RIAA deviation: 20 Hz to 20 kHz : ±0.8 dB Tone Control Bass: ±10 dB at 50 Hz Treble: ±10 dB at 20,000 Hz Signal-to-noise ratio (Direct) Phono: 80 dB (IHF A, 5 mV input) Line: 110 dB (IHF A, 0.5 V input) Muting: Due to setup menu TUNER SECTION FM Tuning range USA & Canadian models: Other models: Usable sensitivity Mono: Stereo: 50 dB quieting sensitivity Mono: Stereo: Capture ratio: Image rejection ratio USA & Canadian models: Other models: IF rejection ratio: Signal-to-no