Onkyo TX8011 free download

File name Onkyo-TX8011 rec.pdf

TX-8011 Ref. No. 3849 092004 SERVICE MANUAL STEREO RECEIVER POWER SLEEP TAPE-1 INPUT SELECTOR TUNER PHONO CD MODEL TX-8011 TAPE-2 DECK-A DECK-B GROUP TUNER PRESET MUTING CD DISC VOLUME REMOTE CONTROLLER RC-330S RC-330S Black model BMDD 120 V AC, 60 Hz SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ON THE SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK. REPLACE THESE COMPONENTS WITH ONKYO PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL. MAKE LEAKAGE-CURRENT OR RESISTANCE MEASUREMENTS TO DETERMINE THAT EXPOSED PARTS ARE ACCEPTABLY INSULATED FROM THE SUPPLY CIRCUIT BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. TX-8011 SPECIFICATIONS Amplifier Section Front L/R 50 W + 50 W (8ohm , 20 Hz-20 kHz, FTC) Dynamic Power 105 W + 105 W (4 ohm) 70 W + 70 W (8 ohm) THD (Total Harmonic Distortion) 0.08 % (Power Rated) Damping Factor 60 (Front, 1 kHz, 8 ohm ) Input Sensitivity and Impedance 150 mV/50 kohm (LINE) 2.5 mV/50 kohm (PHONO MM) Output Level and Impeadance 150 mV/2.2 kohm (REC OUT) Phono Overload 120 mV (MM 1 kHz 0.5 %) Frequency Response 10 Hz-100 kHz/+1 dB -3 dB (TONE FLAT, CD, TAPE-1, TAPE-2/MONITOR) Tone Control ±10 dB, 50 Hz (BASS) ±10 dB, 20 kHz (TREBLE) SN Ratio 100 dB (LINE ,IHF-A) 80 dB (PHONO, IHF-A) Speaker Impedance 4 ohm Power Output General Power Supply AC 120 V, 60 Hz Power Comsumption 180 W Stand-by Power Comsumption 1.35 W Dimensions(W x H x D) 17-1/8" x 5-7/8" x 12-11/16" inches 435 x 150 x 322 mm Weight 16.3 lbs 7.4 kg Analog Inputs PHONO, CD, TAPE-1, TAPE-2/ MONITOR Analog Outputs TAPE-1, TAPE-2/MONI Speaker Outputs 4(SP-A, SP-B) Phones 1 Specifications and features are subject to change without notice. Tuner Section FM Tuning Frequency Range 87.5 MHz-108.0 MHz Usable Sensitivity Stereo 17.2 dBf 2.0 µV(75 ohm IHF) Mono 11.2 dBf 1.0 µV(75 ohm IHF) S/N Ratio Stereo 70 dB (IHF-A) Mono 76 dB (IHF-A) THD Stereo 0.25 % (1kHz) Mono 0.15 % (1kHz) Frequency Response 30 Hz-15 kHz/±1.5 dB Stereo Separation 45 dB ( 1kHz ) AM Tuning Frequency Range 530 kHz-1710 kHz Usable Sensitivity 30 µV S/N Ratio 40 dB THD 0.70% TX-8011 SERVICE PROCEDURES 1. Replacing the fuse This symbol located near the fuses indicates that the fuse used is fast operating type. For continued protection against fire hazard, replace with same type fuse. For fuse rating refer to the marking adjacent to the symbol. Ce symbole indique que le fusible utlise est a rapide. Pour une protection permanente, n'untiliser que fusibles de meme type. Ce darnier est la qu le present symbol est appse. CIRCUIT NO. F901 PART NO. 252163 DESCRIPTION 4A-UL/T-237,Fuse 2. To initialize the unit This device employs a microprocessor to perform various functions and operations. If interference generated by an external power supply, radio wave, or other electrical source results in accident which causes the specified operations and functions to operate abnormally. To perform a result, please follow the procedure be