Technics SEA3000 free download

File name Technics-SEA3000 pwramp.pdf

WARNING: DO NOT CONNECT EITHER WIRE TO THE (For United Kingdom) EARTH TERMINAL WHICH IS MARKED WITH THE ("EB" area code model only) LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW. For your safety, please read the following text carefully. THIS PLUG IS NOT WATERPROOF--KEEP DRY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Before use A 5-ampere fuse is fitted in this plug. Remove the connector cover. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it How to replace the fuse is approved by ASTA or BSI to BS1362. The location of the fuse differ according to the type of AC Check for the ASTA mark or the BSI mark on the mains plug (figures A and B). Confirm the AC mains plug body of the fuse. fitted and follow the instructions below. Illustrations may differ from actual AC mains plug. If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced. 1. Open the fuse cover with a screwdriver. If you lose the fuse cover the plug must not be used until a replacement cover is obtained. Figure A A replacement fuse cover can be purchased from your local dealer. CAUTION! IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET. Figure B Fuse cover If a new plug is to be fitted please observe the wiring code as shown below. If in any doubt please consult a qualified electrician. IMPORTANT The wires in this mains lead are coloured in accordance 2. Replace the fuse and close or attach the fuse cover. with the following code: Blue: Neutral, Brown: Live. As these colours may not correspond with the coloured Figure A markings identifying the terminals in your plug, proceed Fuse as follows: (5 ampere) The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to Figure B the terminal which is marked with the letter L or col