Teac AGD8800 free download

File name Teac-AGD8800 rec.pdf

TEAC AG-D8800 AM/FM STEREO RECEIVER PC board shown are viewed from parts side. The parts with no reference number or no parts number in the exploded views are not supplied. As regards the resistors and capacitors, refer to the circuit diagrams contained in this manual. ! 1 SPECIFICATIONS 2 ADJUSTMENT AND CHECKS 3 EXPLODED VIEW AND PARTS LIST 4 PC BOARDS AND PARTS LISTS 5 WIRING DIAGRAM 6 INCLUDED ACCESSORIES 2 3 5 8 17 19 Parts marked with this sign are safety critical components. they must be replaced with identical components - refer to the appropriate parts list and ensure exact replacement. [E]: EUROPE. [HKG]: HONG KONG [SAF]: SOUTH AFRICA [AUS]: AUSTRALIA AG-D8800 1 SPECIFICATIONS AMPLIFIER Section 100+100 W (Stereo 0.7% THD,40Hz to 20 kHz,6 ohms) 120 W + 120 W ( 6 ohms, JEITA) Surround Output Power 125 W per channel (0.7% THD, 1kHz, 6 ohms, only one channel driven) 150 W per channel (6 ohms, JEITA) Total Harmonic Distortion: 0.09% (at 100 W, 1kHz, 6 ohms) *LINE: 200 mV/47 k ohms Audio Input Sensitivity/Impedance: Output Level / Impedance (TAPE REC): 200 mV/22 k ohms Frequency Response: *LINE: 20 Hz - 50 kHz, +0/-3 dB *LINE: 92 dB (IHF-A) Signal -to-Noise Ratio Tone Control: BASS: +/- 10 dB at 100 Hz, TREBLE: +/- 10 dB at 10 kHz Output Power: Digital Audio Section Sampling Frequency: Digital Input Level: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz COAXIAL ( 75 ohms): 0.5 Vp-p Video Section Output Level: Jacks: 1 Vp-p (75 ohms) RCA Jack (Without notes 100.1 MHz, 65 dBf) 87.5 MHz - 108.0 MHz (50 kHz steps) Mono: 0.5% , Stereo: 0.8% 30 Hz - 15 kHz, +/- 3dB 42 dB Mono: 70 dB / Stereo: 65 dB FM Tuner Section Tuning Range: Total Harmonic Distortion (1 kHz): Frequency Response: Stereo Separation (1 kHz): Signal-to- Noise Ratio: AM Tuner Section Tuning Range: Usable Sensitivity : Total Harmonic Distortion : Signal -to-Noise Ratio : 522 kHz - 1,611 kHz (9 kHz steps) 500 uV/m 1.5 % at 100 dB/m 40 dB at 100 dB/m GENERAL Power Requirements: Power Consumption: AC Outlets(expect Australia model, total 100 W max): Dimension (W x H x D ): AC 230V ,50 Hz 200 W (STANDBY: 3 W or less) Switched x 1 440 x 141 x 330 mm 9.9 kg Weight: Standard Accessories: AM Loop Antenna x 1 FM (T) Type Antenna x 1 FM Matching Transformer x 1 Remote Control Unit (RC-1040 or RC-1042) x1 BATTERY (AAA, R03, UM-4) x 2 Instruction Booklet x 1 * LINE means CD, TAPE,VIDEO Design and specifications are subject to change without notice. Weight and dimensions are approximate. Illustrations may differ slightly from production model. AG-D8800 2 ADJUSTMENTS AND CHECKS 2-1 TUNER SECTION Use a screwdriver with a plastic or ceramic grip for all adjustment. 2-1-1 AM adjustment 1. Output of signal generator should not be greater than necessary to obtain an optimum output reading. 2. Signal generator modulation: 30% 3. Signal frequency: 400Hz 4. Modulator frequency: 603, 999, 1404kHz 5. Switch: press the BAND Button to AM 2-1-2 FM adjustment 1. Output of signal generation should not be greater