File name Alpine-CDM9807RB carrec.pdfSERVICE MANUAL
FM/MW/LW/RDS Compact Disc Receiver
TO ALPINE Home Page
3 / 03-A 68E35111S01
CDM-9807RB
The following cautions will prevent accidents in the workplace and will ensure safe products. *The symbols indicate caution is needed to prevent injuries and damage to property. The symbols and their meanings follow. If you ignore this symbol and handle the product incorrectly or unsafely, serious injury or death may result. If you ignore this symbol and handle the product incorrectly or unsafely, injury or only material damage may result.
Warning Caution
*The following symbols indicate two levels of cautions. When you see this symbol, you have to be very careful.
When you see this symbol, you have to follow the instructions there.
Warning
Do not look squarely into the laser light coming from the pickup.
You may loose you sight.
Fuse Caution
Always use a designated fuse. Use of an incorrect fuse may result in a fire.
Caution
Do not allow wiring to be caught in the screw/chassis.
If wiring is caught in the screw/chassis, it may cause a short circuit, resulting in a fire.
Battery Caution
Use the designated battery. Confirm the correct polarity and seat of the battery. An incorrect battery or an improperly connected or seated battery may result in a fire.
High Temperature Caution
Touching the heat sink may cause severe burns.
Designated Parts Caution
Look up the part list and ensure that only designated parts are used to prevent problems or accidents.
Reverse Power Supply Connections or Misconnections Caution
Reverse power supply connections or misconnections may cause ignition problems and smoke may result.
Wiring Caution
Ensure that the wiring is correct when rewiring to prevent problems with ignition/breakdown.
Soldering Caution
Hot solder from solder splash may cause severe burns.
Wear Gloves
Wear gloves to prevent electrical shocks or injury from the end face of the metal.
Contents Packing Assembly Parts List Packing Method View Specifications Extension Cable Adjustment Procedures Block Diagram Parts Layout on P.W.Boards and Wiring Schematic Diagram Terminal Voltage of IC/ TR Description of IC Terminal Exploded View (Cabinet) Exploded View (CD Deck Mechanism) (DP23S2AO)
Cabinet Assembly Parts List CD Deck Mechanism Assembly Parts List Electrical Parts List
NOTE : Due to continuing product improvement, specifications and designs are subject to change without notice.
Packing Assembly Parts List
Symbol No.
101-1 101-2 101-3 102
Part No.
03S72235F13 36A11113W01 03A11112W01 15D00529K02
Description
SCR,MCH M5X8 FLAT CAP,RUBBER(A) BOLT,HEX.M5(A) CASE,INNER
Symbol No.
103 104 105
Part No.
15D01798K01 01T35536Y08 68P02294K52
Description
CARRYING,CASE ASSY,WIRE ISO 9807R O/M AOEU AODN
Packing Method View
101
-1
101
-2
X4
BO TT SID OM E
X1
105
101 104 101
-3
X1
103 102
X1
BO TT SID OM E
103
102 X1
104
X1
TO CONTENTS
Specifications
Intermediate Frequency ... | 