vestel 11AK20-2 free download

File name 11AK20 Service Manual.pdf

11AK20 CHASSIS CIRCUIT DESCRIPTION GENERAL INFORMATION : This document provides detailed information about the fully I2C controlled Television Chassis named 11AK20. 11AK20 is based on the bus controlled circuits in which all the filters, traps and delay lines have been integrated. Therefore the numbers of external components are reduced and the user, service and factory adjustments are made through I2C BUS control. 1. This chassis has been designed mainly for the 90°, 14 and 15 picture tubes. This chassis has a SMPS circuitry which has been designed to get low stand-by power consumption (less than 3W) as an option. On the other hand, it also has wide range (90-270V 50/60 Hz) mains as an option. The chassis covers almost all the existing worldwide transmission and colour standards as PAL B/G/I/M/N, SECAM B/G/D/K/K/L/L and NTSC M (3.58), NTSC (4.43) using same Main Printed Circuit Board by means of optional components and settings. Tuning system is Voltage Synthesized for all systems Except NTSC M and PAL M/N applications but it is Frequency Synthesized for NTSC M and PAL M/N applications. Furthermore, chassis has also European Wide-range teletext solution as an option. This solution supports all the European teletext standards optionally as 1 page normal, fast and top text modes. The chassis has Euro AV Plug (Scart Socket) for Peritel and SVHS connections. The pictures in 16 - 9 format can be displayed via this Peritel connection. Other optional external connections are front AV input RCA jacks, back AV output RCA jacks and Headphone jack. The software has been developed with a menu driven user interface supporting all possible chassis versions with a storage capacity of 100 programs. 2. IF STAGE : The inputs for IF stage are IF inputs from Tuner to produce front-end Video and Audio, Video and Audio from Scart or front AV RCA jack to be able to select the internal or external video and audio according to the control signals which comes from microcontroller and STV 2118. Then, the resultant video and audio signals are sent to video processing stage and audio output stage, respectively. Furthermore, front-end video and audio signals are sent to scart and or back AV RCA jacks. This part also produces some control signals for tuner and microcontroller. This stage was designed for processing positive (optional) and negative modulated mono and one scart applications. STV 8223 is the IF IC that is used in only negative modulation. There is an alignment which is the VCO adjustment (VL101). The procedure of alignment can be described briefly as follows : The IF signal is applied to the IF inputs in accordance with the standards (for B/G 38.9MHz) at pin # 1 and 2 of SAW filter (Z101). Adjust the VL101 until getting 2.5 V at pin # 9 of uC (IC501). dc This stage is also used for negative and positive modulated, mono applications. STV 8224 (negative and positive modulation and FM sound) (IC 101) and STV 8225 (AM sound) (IC102) are the IF ICs. There are two a

File name 11AK20S Service Manual.pdf

CONTENTS CIRCUIT DESCRIPTION OF THE 11AK20S CHASSIS ... 2 1. GENERAL INFORMATION : ... 2 2. IF STAGE : ... 2 2.1 Video and Sound IF System & Switch IC STV8223: ... 3 2.2 Multi-Standard Video IF, Sound IF and Switch IC (STV 8224) ... 3 3. SIGNAL PROCESSING PART : ... 4 3.1 Bus-controlled Multi-Standard TV Processor IC, STV 2118 : ... 4 3.1.1 Deflection Circuit: ... 4 3.1.2 Filters : ... 5 3.1.3 Video Circuit : ... 5 3.1.4 Chroma Circuit : ... 5 3.1.5 Other Functions : ... 5 3.2 Base Band Chroma Delay Line IC STV 2180 : ... 6 4. HORIZONTAL OUTPUT AND EHT STAGE : ... 6 5. VERTICAL OUTPUT STAGE (TDA 1771) ... 6 6. SOUND OUTPUT STAGE (TDA2822M) : ... 6 7. POWER SUPPLY (SMPS) : ... 6 8. uC (MICROCONTROLLER) : ... 7 9. CRT BASE-BOARD : ... 7 MANUAL ADJUSTMENT PROCEDURES OF THE 11AK20S CHASSIS ... 8 How to enter and exit the SERVICE Menu: ... 8 How to use the ADJUST Menu: ...