NEC FE700 free download

File name SM_FE700.pdf

PART NO. 599910510 SERVICE MANUAL COLOR MONITOR MultiSync FE700/FE700M MODELS FE700(N9705) (A)/(B) FE700M(N9705) (A)/(B) FE700 have two kind models. The maintenance of FE700(models JC-17W01) on the nameplate is performed by the original service manual( Part No.599910496) The maintenance of FE700(models N9705) on the nameplate is performed by this service manual. FE700M has the AUDIO unit instead of the revolving stand. NEC-MITSUBISHI electric visual systems Corporation 200002 08109420 08109421 08109422 08109423 WARNING The SERVICE PERSONNEL should have the appropriate technical training, knowledge and experience necessary to: · Be familiar with specialized test equipment, and · Be careful to follow all safety procedures associated with high voltage CRT circuit designs to minimize danger to themselves and their coworkers. To avoid electrical shocks, this equipment should be used with an appropriate power code and be connected only to a properly grounded AC outlet. This equipment utilized a micro-gap power switch. Turn off the set by first pushing the front panel power switch. Next, remove the power cord from the AC outlet. To prevent fire or shock hazards, do not expose this unit to rain or moisture. This symbol warns the personnel that un-insulated voltage within the unit may have sufficient magnitude to cause electric shock. This symbol alerts the personnel that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems. PRODUCT SAFETY CAUTION 1. When parts replacement is required for servicing, always use the manufacturer's specified replacement. 2. Comply with all caution and safety-related notes on the product display chassis and picture tube. 3. When replacing the component, always be certain that all the components are put back in the place. 4. When servicing display monitor unit, it is required that the provided lead dress is used in the high voltage circuit area. 5. It is also recommended that shatter proof goggles are worn, when removing installing and handling the picture tube. People not equipped with the proper precautionary measures mentioned should keep the picture tube away from body while handling. 6. As for a connector, pick and extract housing with fingers properly since a disconnection and improper contacts may occur, when wires of the connector are led. 7. Use a proper screwdriver. If you use scre