Sanyo STK4050V free download

File name stk4050v.pdf

Ordering number : EN4592A Thick Film Hybrid IC STK4050V AF Power Amplifier (Split Power Supply) (200 W min, THD = 0.08%) Features · Compact packaging supports slimmer set designs · Series designed from 20 up to 100 W (200 W) and pincompatibility (120 to 200 W have 18 pins) · Simpler heat sink design facilitates thermal design of slim stereo sets · Current mirror circuit application reduce distortion to 0.08 % · Supports addition of electronic circuits for thermal shutdown and load-short protection circuit as well as pop noise muting which occurs when the power supply switch is turned on and off. Package Dimensions unit: mm 4051A [STK4050V] Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Symbol VCC max j-c Tj Tc Tstg Condition Rating ± 95 0.95 150 125 ­30 to +125 Unit V °C/W °C °C °C Recommended Operational Conditions at Ta = 25°C Parameter Recommended supply voltage Load resistance Symbol VCC RL Condition Rating ± 66 8 Unit V Operating Characteristics at Ta = 25°C, VCC = ± 66 V, RL = 8 , VG = 40 dB, Rg = 600 , 100 k LPF ON, RL (non-inductive) Rating Parameter Quiescent current Output power Total harmonic distortion Frequency response Input resistance Output noise voltage Neutral voltage Symbol ICCO PO THD fL, fH ri VNO VN Condition VCC = ± 80 V THD = 0.08 %, f = 20 Hz to 20 kHz PO = 1.0 W, f = 1 kHz PO = 1.0 W, +0 dB ­3 20 to 50k 55 1.2 ­70 0 + 70 min 15 200 0.08 typ max 120 Unit mA W % Hz k mVrms mV PO = 1.0 W, f = 1 kHz VCC = ± 80 V, Rg = 10 k VCC = ± 80 V Note: Use rated power supply for test unless otherwise specified. Output noise voltage represents the peak value on the rms scale (VTVM). The noise voltage waveform does not include the pulse noise. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN N3096HA (OT)/O2093YO 5-2612 No. 4592-1/3 STK4050V Specified Transformer Power Supply (MG-250 Equivalent) Equivalent Circuit Application Circuit: 200W min Single Channel AF Power Amplifier No. 4592-2/3 STK4050V s No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. s Anyone purchasing any products described or contained herein for an above-mentioned use shall: x Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., i