Sanyo STK401-100 free download

File name STK401-100.PDF

Ordering number:ENN5060 Thick Film Hybrid IC STK401-100 2ch AF Power Amplifier (Split Power Supply) (60W + 60W min, THD = 0.4%) Overview The STK401-100 is a thick-film audio power amplifier IC belonging to a series in which all devices are pin compatible. This allows a single PCB design to be used to construct amplifiers of various output capacity simpaly by changing hybrid ICs. Also, this series is part of a new, larger series that comprises mutually similar devices with the same pin compatibility. This makes possible the development of a 2-channel amplifier from a 3-channel amplifier using the same PCB. In addition, this new series features 6/3 drive in order to support the low impedance of modern speakers. Package Dimensions unit:mm 4029 [STK401-100] 78.0 70.0 9.0 3.6 21.5 44.0 Features · Pin compatible STK400-000 series (3-channel/single package) STK401-000 series (2-channel/single package) · Output load impedance RL=6/3 supported · New pin assignment Pin configuration has been grouped into individual blocks of inputs, outputs and supply lines, minimizing the adverse effects of pattern layout on operating characteristics. · Few external components In comparison with exisiting series, external bootstrap resistors and capacitors can be eliminated. 1 2.54 0.5 15Ч2.54=38.1 16 2.9 0.4 5.5 4.0 (15.95) SANYO : SIP16 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 93099TH (KT)/60195HA (ID) No.5060­1/9 26.5 STK401-100 Specifications Maximum Ratings at Ta = 25°C Parameter Maximum supply voltage Thermal resistance Junction temperature Operating substrate temperature Storage temperature Available time for load short-circuit Symbol VCC max j-c Tj Tc Tstg ts VCC=±35V, RL=6, f=50Hz, PO=60W Per power transistor Conditions Ratings ±51 1.4 150 125 ­30 to +125 1 Unit V °C/W °C °C °C s Operating Characteristics at Ta = 25°C, RL=6 (noninductive load), Rg=600, VG=40dB Parameter Quiescent current Output power PO2 Total harmonic distortion Frequency response Input impedance Output noise voltage Neutral voltage THD1 THD2 fL, fH ri VNO VN Symbol ICCO PO1 VCC=±42V VCC=±35V, f=20Hz to 20kHz, THD=0.4% VCC=±27