Sanyo STK402-040 free download

File name STK402-040.PDF

Ordering number : ENN7062A Thick-Film Hybrid IC STK402-040 Two-Channel Class AB Audio Power Amplifier IC 25 W + 25 W Overview The STK402-000 series products are audio power amplifier hybrid ICs that consist of optimally-designed discrete component power amplifier circuits that have been miniaturized using SANYO's unique insulated metal substrate technology (IMST). SANYO has adopted a new low thermal resistance substrate in these products to reduce the package size by about 60% as compared to the earlier SANYO STK407-000 series. Package Dimensions unit: mm 4189-SIP15 [STK402-040] Features · Series of pin compatible power amplifiers ranging from 20 W Ч 2 channels to 120 W Ч 2 channels (10%/1 kHz) devices. The same printed circuit board can be used depending on the output power grade. · The pin arrangement is compatible with that of the 3channel STK402-200 series. This means that 3-channel printed circuit boards can also be used for 2-channel products. · Miniature packages -- 15 W/ch to 40 W/ch (THD = 0.4%, f = 20 Hz to 20 kHz); 46.6 mm Ч 25.5 mm Ч 8.5 mm * -- 50 W/ch to 80 W/ch (THD = 0.4%, f = 20 Hz to 20 kHz); 59.2 mm Ч 31.0 mm Ч 8.5 mm * *: Not including the pins. · Output load impedance: RL = 6 · Allowable load shorted time: 0.3 seconds · Supports the use of standby, muting, and load shorting protection circuits. SANYO: SIP15 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N2502AS (OT) No. 7062-1/4 STK402-040 Series Organization These products are organized as a series based on their output capacity. Item Output 1 (10%/1 kHz) Type No. STK402-020 20 W + 20 W STK402-030 STK402-040 STK402-050 45 W +45 W 30 W + 30 W ±40 V ±38 V ±26.5 V STK402-070 STK402-090 STK402-100 STK402-120 30 W + 30 W 40 W + 40 W 20 W + 20 W 25 W + 25 W ±34 V ±32 V ±22 V ±38 V ±36 V ±25 V 60 W + 60 W 80 W + 80 W 100 W + 100 W 120 W + 120 W 40 W + 40 W 50 W + 50 W ±50 V ±44 V ±30 V ±54 V ±47 V ±32 V 60 W + 60 W 80 W + 80 W ±57 V ±50 V ±35 V ±65 V ±57 V ±39 V Output 2 (0.4%/20 Hz to 20 kHz) 15 W + 15 W Maximum supply voltage (No signal) Maximum supply voltage (6 ) Recommended supply voltage (6 ) Package ±30 V ±28 V ±19