Cobra 7915 free download

File name 7518Fitting_Manual.pdf

FITTING INSTRUCTIONS BACK Innovative Car Alarm Thatcham M.I.R.R.C. Evaluation No: TC2-1238/1101 COBRA 7518 High Security Dynamic Radio Key Alarm and Immobiliser system with back-up battery and self-adjusting ultrasonic movement detectors and central door lock switching facility. Suitable for 12v DC negative earth power supply. IMPORTANT 1. The Cobra 7518 alarm system MUST be fitted with a previously installed Category 2 M.I.R.R.C. listed immobiliser to obtain Category 1 status for the vehicle's security systems. If there is no Category 2 Thatcham listed immobiliser fitted along with associated V.S.I.B. installation certificate, Category 1 status cannot be claimed on fitment of the alarm. 2. The Cobra 7518 is a stand-alone alarm system and MUST NOT be connected in any way to an existing immobiliser. 3. The Cobra 7518 MUST NOT take its power supply from the same circuit as the existing immobiliser and not interfere in any way with the immobiliser cut circuitry. 4. Where the existing immobiliser is connected to visual indicators the Cobra 7518 MUST NOT be connected to visible indicators at all. Therefore the two yellow wires are not used and must be insulated. Kit Contains: l Electronic Control Unit with Integral Electronic Siren & Back-up Battery l 2 x AXcess Coded Radio Keys l Ultrasonic Transmitter & Receiver Eyes l LED Indicator Light l Fixing Screws and Connectors l Wiring Harness l User Manual l 1 x Bonnet Switch l 2 x Fuse & Fuse Holders (15A, 7.5A) l 2 x Window Stickers FUNCTIONS l Remote switching Arm and Disarm via an AXcess Coded Radio Key. l Self adjusting Ultrasonic Movement sensor which will trigger the alarm if movement is detected within the vehicle. l Built-in battery back-up. l Immobilisation circuit which is engaged as soon as the alarm is armed (use optional). l While the alarm is armed, 30 second delay, it will sound immediately a door, boot or bonnet is opened or the Ultrasonic sensor is triggered or the ignition is switched ON. l Immediately the alarm is triggered the electronic siren will pulsate @ 118 dB (@1m) and all direction indicators will flash for thirty seconds and reset, ready in case of another theft attempt. l Switching for electric central door locking systems. l An LED indicator light provides a visual indication when the alarm system is armed. It will also 1 display trigger codes if the alarm has been triggered in your absence. l A safety circuit ensures that the alarm cannot be armed while the vehicle's engine is running. l Panic alarm. l Ultrasonic exclusion. l Self learning radio keys. INSTALLATION NOTES Alarm Unit: l Mount the alarm unit with the screws provided (5mm hole) in a suitable position in the engine compartment. Ensure that it is not exposed to water or mounted too close to heat generated by the exhaust and cooling systems. l The active range of the radio key transmitter is approximately 3 metres but may vary depending on the type of vehicle and prevailing weather conditions. Wiring Di