XEROX XE free download

File name Cover.pdf

Pictorial indication This manual uses p~ctonal indications for quick grasp of safety measures. Be sure to understand the following descriptions before reading the manual text. DO not put a vessel with water in it or a metal piece (such as scissors) on the copier. If dropped over or inslde the machine, a fire or an electric shock may be resulted. A A WARNING AI-ENTION If this precaution is not observed, a serious damage or death may be resulted. If this precaution is not observed, a damage may be resulted to the machine and objects around the machine or the operator of the machine. 8 Meaning of pictorial n Q Q indications If a metal piece or water should be dropped inside the machine, immediately turn off the power switch and disconnect the power plug from the power outlet. Then contact the distributor. If the machine is used without proper treatment, a fire or an electric shock may be resulted. lndlcates something which must be taken great care of Indicates something which must not be done. Indicated something which must be done. AWARNING Observe the power specifications of 15A or above and a IOOV power outlet (wtth a groundlng terminal. If not, a fire may be resulted. 8 Avold complex wing. resulted. If not, a fire or an electric shock may be In case of any abnormality such as an overheating. smoking, an abnonal smell, stop using the machine. If the machine IS used without proper treatment, a fire or an electric shock may be resulted. In such a case, immediately turn off the power switch and disconnect the power plug from the power outlet. Then contact the distributor. e Do not damage, break, or process the power cord. Do not put a something heavy on the cord, do not pull or bend the cord forcibly. If not, a fire or an electric shock may be resulted. AvoId touching the power plug with a wet hand. If not, an electric shock may be resulted. DO not remodel or modlfv the machine. It mav cause a fire or an electric shock. AWARNING Be sure to connect the grounding wire (green wire attached to the power cord) and the grounding terminal (which was processed by the distributor) first. If not, a fire or an electric shock may be resulted. (The grounding work process is charged.) Grounding &ninal AATTENTION Do not put the machine on an unstable or slanted surface. It may cause a drop or fall of the machine, resulting in a damage. Be sure to put the machine on a stable desk. When moving the machine, turn off the power switch and disconnect the power plug from the power outlet. The earth wire must be dlsconnetted at last. If not, the cord is damaged to cause a fire and electric shock. e AATTENTION Avoid seeing the light source directly. It may damage your eyes. Avoid installation of the machine in a wet, dusty place. It may cause a fire or an electric shock. When closing the front cover for paper jam process or maintenance, be careful not to pinch your fingers. When leaving the machine unused for a consIderable time, turn off the power