Antari Fog F-450 free download

File name 00002172.pdf

ANTARI F-450 Fog machine Service-manual Serviceunterlagen Documents techniques Documentos de servicio Version 1.0 Service-manual F-450 1 I.No. 1 E3040321 2 E3040452 3 E3040453 4 E3040301 5 E3040417 6 E3040383 Artikelbeschreibung Heizelement fьr K-120 Thermostat 232°C fьr K-20/K-120 Thermostat 260°C fьr K-50/K-120 Platine fьr K-120/K-400 Pumpe SP-35A (M24010) ohne Diode Fluidbehдlter fьr K-120 Article designation Heating element for K-120 Thermostat 232°C for K-20/K-120 Thermostat 260°C for K-50/K-120 PCB for K-120/K-400 Pump SP-35A (M24010) without diode Fluid tank for K-120 Description d`article Corps de chauffe pour K-120 Thermostat 232°C pour K-20/K-120 Thermostat 260°C pour K-50/K-120 Platine pour K-120/K-400 Pompe SP-35A (M24010) sans diode Rйservoir pour K-120 Descripciуn del artнculo Calderнn para K-120 Termostato 232°C para K-20/K-120 Termostato 260°C para K-50/K-120 Platina para K-120/K-400 Bomba SP-35A (M24010) sin diode Receptбculo para K-120 Service-manual F-450 2 Cleaning your fog machine regularly will help reduce costly parts replacement and repair charges. Maintenance Do not allow the fog liquid to become contaminated. Always replace the caps on the fog liquid container and the fog machine liquid tank immediately after filling. After every 40 hours of continuous operation, it is recommended to run a cleaning solution composed of 80% distilled water/20% white vinegar through the system to prevent the accumulation of particulate matter in the heating element. The recommended cleaning regimen is as follows: NON-UNICORE MACHINES 1. While unit is unplugged and cool, unscrew nozzle at very front of unit and clean out debris with vinegar and a pipe cleaner, making sure that the hole is free of clogs. Empty all fog fluid from machine. Add cleaning solution to tank. Plug unit in and begin warm up. 2. Run unit in a well-ventilated area until tank is empty. 3. Replace nozzle. 4. Cleaning is now complete. If storing, put unit away. If unit is to be used again, refill with fog liquid. UNICORE MACHINES 1. While unit is unplugged and cool, unscrew unicore assembly from the front of the unit and clean out debris with vinegar and a pipe cleaner, making sure that the hole is free of clogs. For this process, pure distilled water may also be used. 2. Empty all fog fluid from machine. 3. Replace unicore assembly.* 4. Add cleaning solution to tank. Plug unit in and begin warm up. 5. Run unit in a well-ventilated area until tank is empty. 6. Cleaning is now complete. If storing, put unit away. If unit is to be used again, refill with fog liquid. *Unicore assembly must be screwed in completely and tightened. Unicore should screw in easily, do not force it or you risk stripping the threads and destroying the unicore assembly. Screw unicore in all the way and hand-tighten with a wrench. A loosened unicore assembly is a hazard and must be avoided. If you have any difficulty re-installing the unicore assembly, take the machine to a qualified technici