Toshiba eStudio 520, 523, 600, 623, 720, 723, 850, 853 free download

File name Service Handbook-TOSHIBA eStudio 520, 523, 600, 623, 720, 723, 850, 853.pdf

SERVICE HANDBOOK MULTIFUNCTIONAL DIGITAL SYSTEMS e-STUDIO520/600/720/850 e-STUDIO523/603/723/853 Model: DP-5200/6000/7200/8500 Publish Date: March 2005 File No. SHE040005I0 R04102168901-TTEC Ver09_2007-11 Trademarks · The official name of Windows 95 is Microsoft Windows 95 Operating System. · The official name of Windows 98 is Microsoft Windows 98 Operating System. · The official name of Windows Me is Microsoft Windows Millennium Edition Operating System. · The official name of Windows 2000 is Microsoft Windows 2000 Operating System. · The official name of Windows XP is Microsoft Windows XP Operating System. · Microsoft, Windows, Windows NT and the brand names and product names of other Microsoft prod- ucts are trademarks or registered trademarks of Microsoft Corporation in the U.S. and/or other coun- tries. · Apple, AppleTalk, Macintosh, and Mac are trademarks of Apple Computer, Inc. in the U.S. and other countries. · PostScript is a trademark of Adobe Systems Incorporated. · NOVELL, NetWare, and NDS are trademarks or registered trademarks of Novell, Inc. · Molykote is a registered trademark of Dow Corning Corporation. · Other company names and product names in this manual are the trademarks of their respective companies. © 2005 - 2007 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TOSHIBA TEC CORPORATION. No patent liability is assumed, however, with respect to the use of the information contained herein. GENERAL PRECAUTIONS REGARDING THE SERVICE FOR e-STUDIO520/523/600/603/720/723/850/853 The installation and service should be done by a qualified service technician. 1) Transportation/Installation - When transporting/installing the equipment, employ four persons and be sure to move it by the casters while lifting the stoppers. The equipment is quite heavy and weighs approximately 210 kg (463 lb), therefore pay full atten- tion when handling it. - Be sure not to hold the movable parts or units (e.g. the RADF) when transporting the equipment. - Be sure to use a dedicated outlet with AC 115 V / 16 A, 127 V / 16 A, 220 V or 220-240 V / 9 A for its power source. - The equipment must be grounded for safety. - Select a suitable place for installation. Avoid excessive heat, high humidity, dust, vibration and direct sunlight. - Provide proper ventilation since the equipment emits a slight amount of ozone. - To insure adequate working space for the copying operation, keep a minimum clearance of 80 cm (32") on the left, 80 cm (32") on the right and 10 cm (4") on the rear. - The equipment shall be installed near the socket outlet and shall be accessible. - Be sure to fix and plug in the power cable securely after the installation so that no one trips over