Metex MXD 4660A free download

File name Reference%20Information.pdf

Reference Information 14. Reference Information 14-1 Other issues related to other products Problem A fixed screen can cause permanent damage to the TV Braun tube. Descriptions Braun, PDP and LCD TVs can all be damaged. When a still image is displayed in a sequence, this can leave stains or after-images due to the characteristics of the panel. However, the DLP TV has the advantage that no stains or after-images are left on the screen. The DLP TV has mirror pixels on the DMD panel that project the beam onto the screen, in which the mirror is a digital representation of 0s and 1s, leaving no trace of light. The mirror returns to a blank state so that no stains or after-images are left. The SAMSUNG NOBEL model has both an PC sound port and a SERVICE jack port. Because the shape of the ANYNET port on the DLP TV is the same as that of the SERVICE jack port of the NOBEL, it fails to turn the TV off after a connection has been reported. The PC sound port uses an RS232 port called Phone Jack, and the SERVICE jack port also uses the RS232 port. However, you must not connect the SERVICE port and the PC sound port. Check if the port is the PC sound port or the SERVICE port before connecting the port. Even if the TV cannot be turned on after connecting, the TV will turn on if you disconnect the connection. - A too long DVI cable may cause a malfunction or degradation of the visual quality due to an attenuation of the signal. There is no recommendation for the cable length at present. In general, although a cable length of up to 5 meters should work, please check if video is properly displayed on the screen after connecting. If you think the length of the cable is longer than for normal use, check the visual quality of the video on the screen and shorten the length, if necessary. - This also applies to the PC RGB (D-Sub) cable. When the length of the cable is longer than for normal use, video may not be displayed on the screen. In this case, shorten the cable length. Confusion between the PC sound Port and the SERVICE Jack Port Length of DVI Cable / PC RGB Cable Samsung Electronics 14-1 Reference Information SD/HD broadcasts and the TV's display capability are related 1. A digital broadcast should be transmitted in wide screen (an aspect ratio of 16:9) HD. If the broadcasting station converts a conventional program created in normal screen (aspect ratio of 4:3) into a digital signal and broadcasts the signal, the left and right of the picture will not be displayed. This symptom also appears in other manufacturer's TV's. The three appliance companies are trying to resolve the problem through the Ministry of Information and Communication. When watching an SD (normal) broadcast through a Digital (Wide) TV (480P normal broadcast) When watching an SD (normal) broadcast through a Digital Ready (Wide) TV (Using a set-top-box) When watching an analog (normal) broadcast through a wide TV (When watching a broadcast after changing the aspect ratio of the TV f