SONY HCD-RV660D/RV990D free download

File name sony_hcd-rv660d_rv990d_ver1.3.pdf

HCD-RV660D/RV990D SERVICE MANUAL Ver 1.3 2004. 09 E Model Australian Model · HCD-RV660D/RV990D are the tuner, deck, DVD and amplifier section in MHC-RV660D/RV990D. (Photo: HCD-RV990D) DVD Section Model Name Using Similar Mechanism DVD Mechanism Type Optical Pick-up Name NEW CDM74S-DVBU23 DBU-1 HCD-RG550 CWM43RR-23 Tape Deck Model Name Using Similar Machanism Section Tape Transport Mechanism Type SPECIFICATIONS Amplifier section The following measured at AC 120, 127, 220, 240 V, 50/60 Hz Continuous RMS power output (reference) Front speaker: 100 + 100 watts (6 ohms at 1 kHz, 10% THD) Center speaker*: 40 watts (8 ohms at 1 kHz, 10% THD) Surround speaker*: 40 + 40 watts (6 ohms at 1 kHz, 10% THD) * MHC-RV990D only Inputs MD/VIDEO (AUDIO) IN (phono jacks): voltage 450/250 mV, impedance 47 kilohms GAME (VIDEO) IN (phono jack): 1 Vp-p, 75 ohms GAME (AUDIO) IN (phono jack): voltage 250 mV, impedance 47 kilohms MIC (phone jack): sensitivity 1 mV, impedance 10 kilohms Outputs MD/VIDEO (AUDIO) OUT (phono jacks): voltage 250 mV, impedance 1 kilohm VIDEO OUT (phono jack): max. output level 1 Vp-p, unbalanced, Sync negative, load impedance 75 ohms S-VIDEO OUT (4-pin/mini-DIN jack): Y: 1 Vp-p, unbalanced, Sync negative, C: 0.286 Vp-p, load impedance 75 ohms COMPONENT VIDEO OUT: Y: 1 Vp-p, 75 ohms PB, PR: 0.7 Vp-p, 75 ohms PHONES (stereo mini jack): accepts headphones of 8 ohms or more Front speaker: Use only the supplied speaker SS-RV990 Surround speaker (except for MHC-RV660D): Use only the supplied speaker SS-RS390 Center speaker (except for MHC-RV660D): Use only the supplied speaker SS-CT390 SUB WOOFER OUT: voltage 1 V, impedance 1 kilohm ­ Continued on next page ­ DVD DECK RECEIVER 9-961-078-04 2004I04-1 © 2004. 09 Sony Corporation Audio Group Published by Sony Engineering Corporation 1 HCD-RV660D/RV990D Ver 1.3 Disc player section Compact disc and digital audio and video system Laser Semiconductor laser (DVD: =650 nm, CD: =780 nm) Emission duration: continuous Frequency response DVD (PCM 48 kHz): 2 Hz ­ 22 kHz (±1 dB) CD: 2 Hz ­ 20 kHz (±1 dB) Video color system format NTSC, PAL OPTICAL DIGITAL OUT (Square optical connector jack, rear panel) Wavelength 660 nm System Notes on Chip Component Replacement · Never reuse a disconnected chip component. · Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing · Keep the temperature of soldering iron around 270°C during repairing. · Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). · Be careful not to apply force on the conductor when soldering or unsoldering. UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the lead free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size) : LEAD FREE MARK Unleaded solder has the following characteristics. · Unleaded solder melts at a tem