Sony RDR-HX510 free download

File name RDR-HX510.pdf

RDR-HX510 RMT-D217P SERVICE MANUAL AEP Model UK Model SPECIFICATIONS System Laser: Semiconductor laser Channel coverage: PAL/SECAM (B/G, D/K, I, L) VHF: E2 to E12, R1 to R12, F2 to F10, Italian A to H, Ireland A to J, South Africa 4 to 13/ UHF: E21 to E69, R21 to R69, B21 to B69, F21 to F69/CATV: S01 to S05, S1 to S20, France B to Q/HYPER: S21 to S41 The above channel coverage merely ensures the channel reception within these ranges. It does not guarantee the ability to receive signals in all circumstances. Video reception: Frequency synthesizer system Audio reception: Split carrier system Aerial out: 75-ohm asymmetrical aerial socket Timer: Clock: Quartz locked/Timer indication: 24-hour cycle (digital)/Power back-up duration: 1 hour Video recording format: MPEG Video Audio recording format/applicable bit rate: Dolby Digital 2 ch/256 kbps Inputs and outputs LINE 2 OUT (AUDIO): Phono jack/2 Vrms/10 kilohms (VIDEO): Phono jack/1.0 Vp-p (S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3 Vp-p (PAL) LINE 2 IN/LINE 4 IN (AUDIO): Phono jack/2 Vrms/more than 22 kilohms (VIDEO): Phono jack/1.0 Vp-p (S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.3 Vp-p (PAL) LINE 1 - TV : 21-pin CVBS IN/OUT S-Video/RGB OUT (upstream) LINE 3/DECODER: 21-pin CVBS IN/OUT S-Video/RGB IN S-Video OUT (downstream) Decoder DIGITAL OUT (OPTICAL): Optical output jack/ ­18 dBm (wave length: 660 nm) DIGITAL OUT (COAXIAL): Phono jack/ 0.5 Vp-p/75 ohms COMPONENT VIDEO OUT (Y, PB/CB, PR/CR): Phono jack/Y: 1.0 Vp-p, PB/CB: 0.7 Vp-p, PR/CR: 0.7 Vp-p General Power requirements: 220-240 V AC, 50/60 Hz Power consumption: 52 W Dimensions (approx.): 430 Ч 65 Ч 328 mm (width/height/depth) incl. projecting parts Hard disk drive capacity: 80 GB Mass (approx.): 4.8 kg Operating temperature: 5°C to 35°C Operating humidity: 25% to 80% Supplied accessories: Audio/video cord (1) (UK model only) Mains lead (1) Aerial cable (1) Remote commander (remote) (1) R6 (size AA) batteries (2) Specifications and design are subject to change without notice. Compatible colour systems This recorder is designed to record using the PAL colour system and play back using the PAL or NTSC colour systems. The signals of the SECAM colour system can be received or recorded but played back in the PAL colour system only. Recording of video sources based on other colour systems cannot be guaranteed. DVD RECORDER WARNING!! WHEN SERVICING, DO NOT APPROACH THE LASER EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO CONFIRM LASER BEAM EMISSION, BE SURE TO OBSERVE FROM A DISTANCE OF MORE THAN 25 cm FROM THE SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK. Unleaded solder Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.) CAUTION: The use of optical instrument with this product will increase eye hazard. CAUTION Use of controls or adjust