Sharp AR 5132 free download

File name AR5132_SM.pdf

AR-5132 No.1 COVER SERVICE MANUAL CODE: 00ZAR5132FM1E DIGITAL COPIER NO.1 MODEL AR-5132 CONTENTS [ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 [ 2 ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 [ 3 ] OPTIONS SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 [ 4 ] PART NAMES AND FUNCTION. . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 [ 5 ] UNPACKING AND INSTRATION . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 [ 6 ] PICTURE QUALITY ADJUSTMENT. . . . . . . . . . . . . . . . . . . . . . . 6-1 [ 7 ] DISASSEMBLY AND REASSEMBLY. . . . . . . . . . . . . . . . . . . . . . 7-1 [ 8 ] ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 [ 9 ] SIMULATION AND DIAGNOSTICS . . . . . . . . . . . . . . . . . . . . . . . 9-1 [10] MAINTENANCE AND OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 Parts marked with "!" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. This document has been published to be used for after sales service only. The contents are subject to change without notice. SHARP CORPORATION AR-5132 No.1 COVER CAUTION This copier machine is a class 1 laser product that complies with 21CFR 1040.10 and 1040.11 of the CDRH standard and IEC825. This means that this machine does not produce hazardous laser radiation. The use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This laser radiation is not a danger to the skin, but when an exact focusing of the laser beam is achieved on the eye's retina, there is the danger of spot damage to the retina. The following cautions must be observed to avoid exposure of the laser beam to your eyes at the time of servicing. 1) When a problem in the laser optical unit has occurred, the whole optical unit must be exchanged as a unit, not as individual parts. 2) Do not look into the machine with the main switch turned on after removing the developer unit, toner cartridge, and drum cartridge. 3) Do not look into the laser beam exposure slit of the laser optical unit with the connector connected when removing and installing the optical system. 4) The safety interlock switch is equipped. Do not defeat the safety interlock by inserting wedges or other items into the switch slot. CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION, WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VARO ! AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NДKYMДTTЦMДLLE LASERSДTEILYLLE ДLД KATSO SДTEESEEN. VORSICHT LASER KLASSE 1 UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEЦFFNET UND SICHERHEITSVERRIEGELUNG ЬBERBRЬCKT. NICHT DEM STRAHL AUSSETZEN. ADVARSEL USYNLIG LASERSTRЕLNING VED ЕBNING, NЕR SIKKERHEDSBRYDERE ER UDE AF FUNKTION. UND

File name Sharp AR 5132 Service Manual Part 1.pdf

SERVICE MANUAL CODE: 00ZAR5132FM1E DIGITAL COPIER NO.1 MODEL AR-5132 CONTENTS [ 1 ] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 [ 2 ] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 [ 3 ] OPTIONS SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 [ 4 ] PART NAMES AND FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 [ 5 ] UNPACKING AND INSTRATION . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 [ 6 ] PICTURE QUALITY ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . 6-1 [ 7 ] DISASSEMBLY AND REASSEMBLY . . . . . . . . . . . . . . . . . . . . . . 7-1 [ 8 ] ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 [ 9 ] SIMULATION AND DIAGNOSTICS . . . . . . . . . . . . . . . . . . . . . . . 9-1 [10] MAINTENANCE AND OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 Parts marked with "!" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. This document has been published to be used for after sales service only. The contents are subject to change without notice. SHARP CORPORATION CAUTION This copier machine is a class 1 laser product that complies with 21CFR 1040.10 and 1040.11 of the CDRH standard and IEC825. This means that this machine does not produce hazardous laser radiation. The use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This laser radiation is not a danger to the skin, but when an exact focusing of the laser beam is achieved on the eye's retina, there is the danger of spot damage to the retina. The following cautions must be observed to avoid exposure of the laser beam to your eyes at the time of servicing. 1) When a problem in the laser optical unit has occurred, the whole optical unit must be exchanged as a unit, not as individual parts. 2) Do not look into the machine with the main switch turned on after removing the developer unit, toner cartridge, and drum cartridge. 3) Do not look into the laser beam exposure slit of the laser optical unit with the connector connected when removing and installing the optical system. 4) The safety interlock switch is equipped. Do not defeat the safety interlock by inserting wedges or other items into the switch slot. CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION, WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VARO ! AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NДKYMДTTЦMДLLE LASERSДTEILYLLE ДLД KATSO SДTEESEEN. VORSICHT LASER KLASSE 1 UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEЦFFNET UND SICHERHEITSVERRIEGELUNG ЬBERBRЬCKT. NICHT DEM STRAHL AUSSETZEN. ADVARSEL USYNLIG LASERSTRЕLNING VED ЕBNING, NЕR SIKKERHEDSBRYDERE ER UDE AF FUNKTION. UNDGЕ UDSAETTELSE FOR STRЕLNING. VARNIN

File name Sharp AR 5132 Service Manual Part 2.pdf

SERVICE MANUAL CODE: 00ZAR5132TM1E DIGITAL COPIER NO.2 MODEL AR-5132 CONTENTS [ 1 ] PRINCIPLES OF THE DIGITAL COPIER . . . . . . . . . . . . . . . . . . . 1-1 [ 2 ] PROCESS SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 [ 3 ] DEVELOPING SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 [ 4 ] PAPER FEED SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 [ 5 ] TRANSPORT AND FUSING SECTION . . . . . . . . . . . . . . . . . . . . 5-1 [ 6 ] HIGH VOLTAGE SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 [ 7 ] RADF MECHANISM SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 [ 8 ] DESK UNIT MECHANISM SECTION . . . . . . . . . . . . . . . . . . . . . . 8-1 [ 9 ] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1 [10] RADF ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . 10-1 [11] DESK UNIT ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . 11-1 Parts marked with "!" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set. This document has been published to be used for after sales service only. The contents are subject to change without notice. SHARP CORPORATION CAUTION This copier machine is a class 1 laser product that complies with 21CFR 1040.10 and 1040.11 of the CDRH standard and IEC825. This means that this machine does not produce hazardous laser radiation. The use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This laser radiation is not a danger to the skin, but when an exact focusing of the laser beam is achieved on the eye's retina, there is the danger of spot damage to the retina. The following cautions must be observed to avoid exposure of the laser beam to your eyes at the time of servicing. 1) When a problem in the laser optical unit has occurred, the whole optical unit must be exchanged as a unit, not as individual parts. 2) Do not look into the machine with the main switch turned on after removing the developer unit, toner cartridge, and drum cartridge. 3) Do not look into the laser beam exposure slit of the laser optical unit with the connector connected when removing and installing the optical system. 4) The safety interlock switch is equipped. Do not defeat the safety interlock by inserting wedges or other items into the switch slot. CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION, WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VARO ! AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NДKYMДTTЦMДLLE LASERSДTEILYLLE ДLД KATSO SДTEESEEN. VORSICHT LASER KLASSE 1 UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEЦFFNET UND SICHERHEITSVERRIEGELUNG ЬBERBRЬCKT. NICHT DEM STRAHL AUSSETZEN. ADVARSEL USYNLIG LASERSTRЕLNING VED ЕBNING, NЕR SIKKERHEDSBRYDER