SMONET 2CH/4CH/6CH/8CH NVR Kits free download

File name User-Manual-V.7-English-201709 smonet.pdf

Wireless Network Video Recorder System User Manual 2PCS/4PCS/6PCS/8PCS 720P/960P/1080P 2CH/4CH/6CH/8CH NVR Kits V.7-201709 Package Contents Thank you for choosing Smonet product. Here is the list for product and relevant accessories. S/N Item Quantity 1 NVR 1pc 2 IP Camera(2CH/4CH/6CH/8CH) 2/4/6/8 pcs 3 DC 12V/2A power supply(for NVR)-3.3 feet 1pc 4 DC 12V/1A power supply(for IPC2CH/4CH/6CH/8CH)-10 feet 2/4/6/8 pcs 5 3.3 Ft network cable 1pc 6 USB mouse 1pc 7 4 Screws for HDD (only for systems without HDD) 1bag 8 User manual 1pc How can I get product and technical support? US Toll Free:1-866-678-0666 (Available after 5:00 PM at Pacific Time) CA Toll Free:1-888-792-5254 (Available after 5:00 PM at Pacific Time) Email:[email protected] Skype ID: safeskysales003 FaceTime/What's App/Viber/Tango: +86-158-1749-7067 Wechat ID: B997520270 Website: WWW.SMONETCCTV.COM 01 1 Installing your Network Video Recorder System Getting Started Before you begin installation, be sure to have the following: PC or TV monitor VGA or HDMI cable Router (WAN) Hard drive.If you purchased the system without hard drive, you must first install it. If you do not have a hard drive, you will not be able to record and playback video. Please see below for hard drive installation instructions Do not attempt to install your cameras until you are able to view images on your TV or PC monitor first. Installing the hard drive ­ if your system has a pre-installed hard drive, please skip this step and go directly the section below, Installing the NVR. If you purchased a hard drive separately, it must be formatted after installed it. See the Frequently Asked Questions section of this manual for instructions about how to format a hard drive, refer the question, How do I format my new hard drive and check my hard drive information? Remove the cover from the unit, Remove the cover Insert the hard drive, secure it and remove the top two screws to the bottom of the unit with the four screws Connect the data wire and Replace the cover and fasten screws power wire as shown 02 Installing the System Connect the NVR and cameras with power adapters provided. Attach the anten nas to the cameras, connect the mouse to the NVR. (Please note, power supply for NVR box is 12