Icom Icom_D-STAR_ID-E880_serv free download

File name Icom_D-STAR_ID-E880_serv.pdf

VHF/UHF DIGITAL TRANSCEIVER S-14529XZ-C1 Apr. 2009 INTRODUCTION CAUTION This service manual describes the latest technical NEVER connect the transceiver to an AC outlet or to a DC information for the ID-880H and ID-E880 VHF/UHF DIGITAL power supply that uses more than specified. This will ruin TRANSCEIVER at the time of publication. the transceiver. TYPE OF Max. TX POWER DO NOT expose the transceiver to rain, snow or any liquids. MODEL VERSION EMISSION (VHF/UHF) DO NOT reverse the polarities of the power supply when [TPE] 25/25 connecting the transceiver. [USA] DO NOT apply an RF signal of more than 20 dBm (100 mW) to [KOR] ID-880H the antenna connector. This could damage the transceiver's [AUS] front-end. F2D, F3E, [CHN] F7W 50/50 To upgrade quality, any electrical or mechanical parts and [EXP] internal circuits are subject to change without notice or [EUR] obligation. ID-E880 [ITR] [EUR-01] (ID-880H) ORDERING PARTS REPAIR NOTES Be sure to include the following four points when ordering 1. Make sure that the problem is internal before replacement parts: disassembling the transceiver. 2. DO NOT open the transceiver until the transceiver is 1. 10-digit Icom parts numbers disconnected from its power source. 2. Component name 3. DO NOT force any of the variable components. Turn 3. Equipment model name and unit name them slowly and smoothly. 4. Quantity required 4. DO NOT short any circuits or electronic parts. An insulated tuning tool MUST be used for all adjustments. 5. DO NOT keep power ON for a long time w